Bosch Rexroth | SYDFE1-2X028L-PKC62KC3-0000-A0X0XXX
SYDFE1-2X/028L-PKC62KC3-0000-A0X0XXX
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The SYDFE1-2X/028L-PKC62KC3-0000-A0X0XXX is produced by Bosch Rexroth within the SYD Hydraulic Control Systems series and delivers regulated hydraulic performance for automated machinery. Its displacement is 28 cm³ per revolution, and the shaft turns counterclockwise when viewed from the drive end. The required hydraulic medium is mineral oil in the HL or HLP classification, and the housing must be pre-filled with 0.7 l before startup. Without a through-drive, the unit weighs 20.5 kg, aiding direct mounting on power modules. Continuous operation begins at a minimum speed of 250 rpm and extends to 3000 rpm at full rating. System designers may load the circuit to a maximum operating pressure of 280 bar when integrating this unit into closed-loop hydraulic automation.
The rotating assembly carries a moment of inertia of 0.0017 kg·m², allowing quick speed changes under servo control. At 1500 rpm the unit delivers up to 42 l/min of flow, while nominal speed increases this figure to 84 l/min. Shaft power reaches 20 kW at 1500 rpm and rises to 39 kW at nominal speed when the pressure differential is held at 280 bar. Under the same pressure, the output torque is rated at 125 Nm. The permissible axial load on the shaft is 1000 N, and radial load may reach 1200 N, ensuring bearing stability in belt or gear-driven layouts.
Technical Specifications
Direction Of Rotation
Counterclockwise
Displacement
28 cm³
Housing Filling Quantity
0.7 l
Hydraulic Fluid
Mineral Oil (HL/HLP)
Mass (without Through-drive)
20.5 kg
Max Axial Force
1000 N
Max Flow (1500 Rpm, Vg Max)
42 l/min
Max Flow (nnom, Vg Max)
84 l/min
Max Operating Pressure
280 bar
Max Power (Δp 280 Bar, 1500 Rpm)
20 kW
Max Power (Δp 280 Bar, Nnom)
39 kW
Max Radial Force
1200 N
Max Speed (vg Max)
3000 rpm
Max Torque (Δp 280 Bar)
125 Nm
Min Speed
250 rpm
Moment Of Inertia
0.0017 kg·m²
1620 Old Apex Road
Shipping & Payment Options
