Bosch Rexroth | SY2DFEE-2X140-14001073333-01073333
SY2DFEE-2X/140-140/01073333 01073333
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The SY2DFEE-2X/140-140/01073333 hydraulic control module is part of the Bosch Rexroth SYD Hydraulic Control Systems series and regulates pump displacement and valve position in closed-loop hydraulic automation. The unit runs from a nominal 24 VDC supply, with a permissible range from 21 V to 35 V, allowing tolerance for battery or rectifier variation. Internal circuits draw a rated 0.6 A during steady operation, while momentary peaks may reach 1.25 A when valves shift. The pressure transducer input expects a 100 Ω load, so sensor selection must match this impedance for proper current scaling. A ±10 V analog output provides the alpha-actual signal used by external controllers to monitor real-time pressure. All wiring is terminated on a 12-pin X1 central connector, which simplifies panel replacement.
The controller withstands system pressures up to 280 bar, enabling it to drive actuators in medium-pressure hydraulic lines. It maintains loop stability down to 250 rpm pump speed, which supports low-flow applications without stalling. For feedback to supervisory PLCs, it sources a 1.5 mA analog current that tracks the commanded position. The housing carries an IP65 rating, protecting the electronics from dust ingress and water jets common on factory floors. Continuous operation is allowed in ambient temperatures up to 60 °C, and the electronics remain undamaged in storage up to 70 °C, easing warehouse logistics. Together these limits and signals define the safe envelope for integrating the SY2DFEE-2X module into press, molding, or test-rig hydraulics.
Technical Specifications
Actual Pressure Input Load (current)
100 Ω
Ambient Temperature (max)
60 °C
Analog Output Current
1.5 mA
Analog Output Voltage (alpha Actual)
±10 V
Central Connection X1
12-pin
Maximum Current
1.25 A
Maximum Operating Pressure
280 bar
Minimum Speed
250 rpm
Operating Voltage (nominal)
24 VDC
Operating Voltage Lower Limit
21 V
Operating Voltage Upper Limit
35 V
Protection Class
IP65
Rated Current
0.6 A
Storage Temperature (max)
70 °C
1620 Old Apex Road
Shipping & Payment Options
