Bosch Rexroth | PP20G2022753BM1H3L0
PP20/G2022/7.5/3BM1/H3/L0
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PP20/G2022/7.5/3BM1/H3/L0 power pack is produced by Bosch Rexroth as part of the Rexroth Power Packs series and supplies pressurized fluid for hydraulic automation. It uses a 7.5 hp (5.5 kW) motor to drive the internal pump, delivering mechanical energy for medium-duty circuits. The motor operates at 1750 rpm so discharge remains steady under typical industrial cycles, and its 3-phase winding accepts either 230 or 460 V, which simplifies connection to common plant mains. A TEFC enclosure surrounds the motor to keep dust and spray away from the windings, while the 213TC frame size aligns with standard C-face mounts for straightforward replacement. The pump displacement is 1.37 in³ per revolution (22.45 cm³/rev), establishing the volumetric rate that combines with the shaft speed to yield a maximum flow of 10.0 GPM (37.85 L/min). System loads can be supplied up to 1090 psi (75 bar), a pressure limit that protects components from overstress during continuous duty.
Thermal stability is maintained by an air/oil heat exchanger that removes excess heat from the circulating fluid without additional water infrastructure. A 20 gal steel reservoir stores the working oil and offers structural rigidity for mobile or stationary frames, and a −8 SAE drain port allows complete fluid evacuation during service. Clean return flow is ensured by a 20-micron absolute filter that traps particulate before oil re-enters the tank. The manifold section provides one D03 station, giving space for a directional control valve when circuit logic is required, and all manifold ports are sized to SAE-8 to match common hose fittings. These connection details concentrate the control hardware close to the power unit, reducing external plumbing and improving response time.
Technical Specifications
Heat Exchanger Type
Air/Oil
Manifold Port Size
SAE-8
Manifold Stations
1 (D03)
Max Flow
10.0 GPM (37.85 L/min)
Max Pressure
1090 psi (75 bar)
Motor Enclosure
TEFC
Motor Frame Size
213TC
Motor Phases
3-phase
Motor Power
7.5 hp (5.5 kW)
Motor Speed
1750 rpm
Motor Voltage
230/460 V
Pump Displacement
1.37 in³/rev (22.45 cm³/rev)
Reservoir Capacity
20 gal
Reservoir Drain Port
-8 SAE
Reservoir Material
Steel
Return Filter Rating
20 Micron (Absolute)
1620 Old Apex Road
Shipping & Payment Options
