Bosch Rexroth | PP15G2011753BM6H1L0
PP15/G2011/.75/3BM6/H1/L0
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PP15/G2011/.75/3BM6/H1/L0 power pack, produced by Bosch Rexroth for the Rexroth Power Packs series, supplies pressurized hydraulic fluid to automation circuits that demand consistent flow and pressure. The pump displacement is 0.68 in³/rev (11.14 cm³/rev), which defines how much oil the unit delivers with each shaft rotation. A maximum flow of 5.0 GPM (18.93 L/min) supports moderate-duty actuators without oversizing the system. The motor runs at 1,750 rpm, matching common industrial speeds for steady pump operation, and it is designed for a 60 Hz supply so it integrates directly with standard North American mains. A Totally Enclosed Fan Cooled motor enclosure keeps contaminants away from the windings while external airflow removes heat. The reservoir holds 15 gal (57.0 L), ensuring adequate oil volume for cooling and de-aeration, and the tank is fabricated from steel to resist deformation under vacuum or transport loads. A 20 µm absolute return filter captures fine particles before oil reenters the reservoir, protecting downstream valves and cylinders.
Six bar manifold stations allow multiple valve stacks to be mounted on a single pressure rail, simplifying complex circuits. A visual clogging indicator shows element saturation so maintenance can be scheduled before flow is restricted. The water-to-oil heat exchanger, identified as type H1, removes thermal energy from the fluid to keep viscosity within design limits; its oil side uses an SAE-12 port while the water side connects through a 3/4 NPT thread, facilitating straightforward piping. A pressure gauge is fitted to provide real-time system readings during setup and fault finding. The pressure line includes a check valve that prevents reverse flow when actuators retract or pumps stop. A system relief valve is installed to divert excess fluid when pressure exceeds the setpoint, safeguarding hoses and components from overload.
Technical Specifications
Bar Manifold Stations
6
Clogging Indicator
Visual
Heat Exchanger Oil Port
SAE-12
Heat Exchanger Type
Water/Oil (H1)
Heat Exchanger Water Port
3/4 NPT
Maximum Flow
5.0 GPM (18.93 L/min)
Motor Enclosure
TEFC
Motor Frequency
60 Hz
Motor Speed
1750 rpm
Pressure Gauge
Included
Pressure Line Check Valve
Included
Pump Displacement
0.68 in³/rev (11.14 cm³/rev)
Reservoir Capacity
15 gal (57.0 L)
Reservoir Material
Steel
Return Filter Rating
20 µm Absolute
System Relief Valve
Included
1620 Old Apex Road
Shipping & Payment Options
