Bosch Rexroth | PP10P1-1323BM1H0L0
PP10/P1-13/2/3BM1/H0/L0
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PP10/P1-13/2/3BM1/H0/L0 hydraulic power pack belongs to the Rexroth Power Packs series and is manufactured by Bosch Rexroth. It combines a motor-pump group and reservoir to deliver pressurized fluid to automated cylinders and valves. The reservoir holds 10 gal (38 L), providing adequate oil volume for small machine tools and material-handling stations. A gear pump displacement of 0.15 in³/rev (2.45 cm³/rev) meters fluid for consistent actuator motion. The pump is driven by a 2 hp (1.4 kW) electric motor so equipment can run continuously without overloading the drive. The motor turns at 1750 rpm, balancing noise with volumetric efficiency. A dual-voltage winding of 230/460 V simplifies installation on common plant power buses, and the 3-phase configuration lowers current per conductor for cooler wiring. The motor is built on a 145TC frame, allowing direct coupling to the pump without alignment shims.
The hydraulic circuit is rated for a maximum flow of 1.1 GPM (4.15 L/min), matching compact cylinders that cycle at moderate speed. System pressure reaches 2600 PSI (180 bar) so clamping fixtures obtain firm holding force. A single bar manifold station keeps the package minimal while still accepting one directional valve. Manifold A and B work ports are SAE-8, giving uniform porting across accessories. The tank drain exits through a ‑8 SAE fitting to maintain return-line integrity. Auxiliary piping is simplified by three dedicated service points: X1 is a ‑8 JIC port, X2 is a ‑12 SAE port, and X3 is a ‑8 JIC port. Contaminant control is handled by a return filter with a 20 µm absolute rating, preventing particle ingress to valves and extending component life.
Technical Specifications
Bar Manifold Stations
1
Drain Connection
-8 SAE
Manifold A/b Ports
SAE-8
Max Flow
1.1 GPM (4.15 L/min)
Max Pressure
2600 PSI (180 bar)
Motor Frame
145TC
Motor Phase
3-Phase
Motor Power
2 hp (1.4 kW)
Motor Speed
1750 rpm
Motor Voltage
230/460 V
Pump Displacement
0.15 in3/rev (2.45 cm3/rev)
Reservoir Capacity
10 gal (38 L)
Return Filter Rating
20 µm absolute
X1 Connection
-8 JIC
X2 Connection
-12 SAE
X3 Connection
-8 JIC
1620 Old Apex Road
Shipping & Payment Options
