PP10/G2011/10/3BM1/H0/L0

The PP10/G2011/10/3BM1/H0/L0 power pack is produced by Bosch Rexroth for the Rexroth Power Packs series. It supplies pressurized hydraulic fluid to industrial automation circuits that rely on consistent volume and pressure. The pump displacement is 0.68 in³ per revolution (11.14 cm³/rev), so each shaft turn moves a defined volume of oil for predictable actuator motion. A maximum flow of 5.0 GPM (18.93 L/min) limits the continuous delivery rate and matches medium-sized tooling requirements. A 10 hp (7.4 kW) electric motor provides the mechanical input needed to maintain this flow. The motor speed is fixed at 1750 rpm, aligning the prime mover with the pump’s displacement to reach rated output without over-speed. Operation on a 60 Hz supply keeps rotational speed stable on common power grids, and the dual 230/460 V winding lets the unit connect to low or high voltage plants. Three-phase power delivers smooth torque, while a TEFC enclosure shields the windings from airborne oil and dust.

System pressure capability reaches 2900 psi (200 bar), giving the circuit enough force for clamping, lifting, or pressing loads found in automated workstations. A steel reservoir holds 10 gal (38.0 L) of hydraulic fluid, supplying thermal mass and reserve volume during cylinder retraction. The return filter is rated at 20 µm absolute, so contaminants above this size are trapped before oil re-enters the tank. A single-station D03 bar manifold is fitted to mount a directional valve directly on the pack and shorten line runs. A fluid level indicator is present for quick visual checks during routine maintenance, and a pressure line check valve prevents backflow that could spin the pump in reverse. The motor frame size is 215TC, simplifying replacement with standard NEMA components and ensuring alignment with existing bases. Together these features allow the unit to regulate flow, maintain cleanliness, and protect components in automated hydraulic systems.