Bosch Rexroth | PSV-SNCF-80GRMB-65-110115
PSV-SNCF-80GRMB-65-110/115
Request a Quote
Available, Ships in 1-2 weeks
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The PSV-SNCF-80GRMB-65-110/115 pump belongs to the PSV Variable Vane Pumps series and is built by Bosch Rexroth for hydraulic automation where variable flow is needed without stopping the prime mover. This model is a variable displacement vane pump with a displacement of 118 cm³ per revolution, so each shaft rotation delivers that volume to the circuit. At 1800 rpm it can supply 234.7 L/min, which matches typical industrial actuator demand at moderate speeds. The drive may be run up to 1800 rpm without overspeeding the cartridge group. Right-hand rotation at the shaft end simplifies coupling to standard clockwise prime movers. Installation is flexible because the housing can be mounted in any position and secured with an ISO 3019/1 flange. The nominal size designation 80 identifies its envelope and port geometry for system designers.
The hydraulic limits of the pump are set by a maximum system pressure of 103 bar, a value also encoded by the G pressure rating that equates to 1500 psi for users who specify in imperial units. Suction conditions must stay above 0.8 bar absolute to avoid cavitation at full flow. Mineral oil or ester fluids are permitted, allowing use in both petroleum based and biodegradable circuits. An integrated solenoid designed for two-pressure operation is included, and its coil accepts 110/115 V so control wiring can tie directly to common single-phase supplies. No volume control device is fitted, leaving flow regulation to the displacement mechanism alone. The fully assembled unit weighs 80 kg, a factor to consider when planning service lifts or manifold supports.
Technical Specifications
Coil Voltage
110/115 V
Displacement
118 cm³/rev (8.0 in³)
Flow @ 1800 Rpm (100 Psi)
234.7 L/min (62 gpm)
Max Drive Speed
1800 rpm
Max System Pressure
103 bar (1500 psi)
Min Inlet Pressure
0.8 bar abs (11.6 psia)
Mount Position
Any
Mounting Interface
ISO 3019/1 Flange
Nominal Size
80
Permitted Fluid
Mineral Oil Or Esters
Pressure Rating Code
G (1500 psi)
Pump Type
Variable Displacement Vane
Rotation
RH Only (CW Shaft End)
Two-pressure Solenoid
Yes
Volume Control
None
Weight
80 kg (176 lb)
1620 Old Apex Road
Shipping & Payment Options
