Bosch Rexroth | M-4SED10D1X350CG96N9K4
M-4SED10D1X/350CG96N9K4
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-4SED10D1X/350CG96N9K4 valve is produced by Bosch Rexroth for the M-SED Poppet Valves series. It serves as a directional poppet element in hydraulic automation, permitting or blocking flow paths as control signals energize the coil. The unit is built in size 10, or NG10, so it fits subplates intended for that nominal bore. A porting pattern of ISO 4401-05-04-0-05 aligns its ports with standard manifold layouts, reducing machining time. The valve withstands operating pressures up to 350 bar, allowing it to control high-pressure circuits, while a maximum flow of 40 l/min supports medium throughput actuators. A wet-pin solenoid energizes the poppet; its coil is rated at 96 V DC for use on matching control supplies. Continuous energization is permitted by a 100 percent duty cycle, and electrical demand remains limited to 30 W which simplifies power budgeting inside control cabinets.
The design can switch up to 15 000 cycles per hour, giving fast response for high-duty servo loops. Oil cleanliness must meet ISO 4406 code 20/18/15 to preserve poppet sealing accuracy and extend service life. Because installation orientation is optional, the valve may be mounted horizontally or vertically without affecting performance. A concealed N9 manual override allows mechanical actuation during commissioning or power loss without exposing components to contamination. The housing carries an IP65 protection rating, so dust and water jets cannot reach live parts when the connector is fitted. Fixing to the subplate uses M6 × 90 screws, and each screw must be tightened to 12.5 N·m to secure the body against pressure loads. Total weight is 3.9 kg, supporting easy handling during assembly while still providing sufficient mass for vibration damping.
Technical Specifications
Cleanliness Class
ISO 4406 20/18/15
Coil Voltage
96 V DC
Duty Cycle
100%
Installation Orientation
Optional
Manual Override
Concealed (N9)
Max Flow
40 l/min
Max Operating Pressure
350 bar
Max Switching Frequency
15000 1/h
Mounting Screws
M6 x 90
Porting Pattern
ISO 4401-05-04-0-05
Power Consumption
30 W
Size
10 (NG10)
Solenoid Type
Wet-Pin
Tightening Torque
12.5 Nm
Type Of Protection
IP65
Weight
3.9 kg
1620 Old Apex Road
Shipping & Payment Options
