Bosch Rexroth | M-3SED10UK1X350CG24K4QMAG24
M-3SED10UK1X/350CG24K4QMAG24
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-3SED10UK1X/350CG24K4QMAG24 valve belongs to the M-SED Poppet Valves series from Bosch Rexroth and is used to switch or block hydraulic flow in automated circuits. It is a 3/2 directional poppet valve in NG10 size, so it directs fluid between three ports while fitting manifolds drilled for size 10 cavities. The unit is supplied in a normally open initial position, allowing flow during power-off states and closing when the solenoid is energized. It withstands operating pressures up to 350 bar, enabling installation in high-pressure systems. The design accommodates a maximum flow of 40 l/min to support medium-capacity actuators without excessive pressure loss. Mounting follows the ISO 4401-05-04-0-05 porting pattern, which standardizes interface dimensions for stackable sandwich assemblies. Correct tightening requires 12.5 Nm ±10 % of torque on the mounting screws to maintain seal integrity. Hydraulic cleanliness must meet class 20/18/15 per ISO 4406 to minimize poppet wear and leakage.
For electrical actuation the solenoid coil is rated at 24 V DC and draws 30 W, so control systems can power it directly from typical machine supplies. A 100 % duty cycle permits continuous energization without overheating, while a maximum coil temperature of 150 °C guards against thermal damage in hot environments. The connector conforms to DIN EN 175301-803, simplifying wiring with widely available molded plugs. When mated, the enclosure reaches IP65 protection, preventing dust ingress and water jets during wash-down. Spool position A monitoring gives feedback to the controller, confirming that the command has shifted the poppet. The assembly weighs 2.6 kg, allowing manual handling during manifold maintenance. These electrical and feedback features integrate the valve into closed-loop hydraulic automation where reliable switching and status indication are required.
Technical Specifications
Cleanliness Class
20/18/15 (ISO 4406)
Coil Temperature Max
150 °C
Coil Voltage
24 V DC
Duty Cycle
100%
Electrical Connection
DIN EN 175301-803
Initial Position
Normally Open
Max Flow
40 l/min
Max Operating Pressure
350 bar
Mounting Torque
12.5 Nm ±10%
Porting Pattern
ISO 4401-05-04-0-05
Position Monitoring
Spool Position A
Power Consumption
30 W
Protection Class
IP65 (with connector)
Size
10 (NG10)
Valve Type
3/2 Directional Poppet Valve
Weight
2.6 kg
1620 Old Apex Road
Shipping & Payment Options
