Bosch Rexroth | M-2SED6PK1X350CG24N9K4V
M-2SED6PK1X/350CG24N9K4/V
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The M-2SED6PK1X/350CG24N9K4/V poppet valve belongs to the M-SED Poppet Valves series and is manufactured by Bosch Rexroth for precise hydraulic automation. It withstands operating pressures up to 350 bar so it can be installed in high-pressure circuits. A wet-pin, detachable coil solenoid transfers heat to the fluid and allows rapid coil replacement. The solenoid is powered by 24 V DC and accepts a voltage variation of ±10 percent, which matches common control supplies while ensuring proper actuation when line levels fluctuate. Direct current operation is mandatory for the magnetic circuit, and the coil draws 30 W during steady energization. The winding resists temperatures up to 150 °C, and continuous service is supported by a 100 percent duty cycle. When fitted with the specified plug, the enclosure meets IP65, protecting internal parts from dust and low-pressure water jets.
The valve is shipped with a check valve insert that blocks reverse flow whenever the poppet is closed, preventing unwanted back-pressure. Electrical termination uses an EN 175301-803 (K4) connector, giving quick disconnect capability in control cabinets. A concealed manual override lets technicians shift the poppet mechanically for testing or emergency positioning without energizing the coil. The magnetic system reaches switching rates of up to 15 000 cycles per hour, enabling rapid sequence control in automated lines. Mineral oils of type HL or HLP according to DIN 51524 are permitted, and the hydraulic fluid must meet cleanliness class ISO 4406 (c) 20/18/15 to avoid premature wear. All dynamic seals are manufactured from FKM, providing resistance to heat and common hydraulic additives.
Technical Specifications
Check Valve Insert
Included
Cleanliness Class
ISO 4406 (c) 20/18/15
Duty Cycle
100%
Electrical Connector
EN 175301-803 (K4)
Hydraulic Fluid
HL, HLP (DIN 51524)
Manual Override
Concealed
Max Coil Temperature
150 °C
Max Switching Frequency
15000 1/h
Operating Pressure
350 bar
Power Consumption
30 W
Seal Material
FKM
Solenoid Type
Wet-Pin (Oil), Detachable Coil
Supply Voltage
24 V DC
Type Of Protection
IP65
Type Of Voltage
DC
Voltage Tolerance
±10%
1620 Old Apex Road
Shipping & Payment Options
