Bosch Rexroth | AZPG-22-045LQC12MB-SO696
AZPG-22-045LQC12MB SO696
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZPG-22-045LQC12MB SO696 pump belongs to the High Performance AZPG Gear Pumps series from Bosch Rexroth and supplies fixed-displacement flow for hydraulic automation systems. It moves 45 cm³ of fluid per revolution to drive actuators at a predictable rate. The pump is set for counterclockwise rotation, so prime mover orientation must follow that direction. Continuous operation is permitted at 250 bar, and the same 250 bar rating applies for intermittent duty without derating. Pressure spikes up to 300 bar can be tolerated briefly to protect the circuit during load transients. Up to 180 Nm of torque can be applied to the shaft to achieve full output. Rotational speed may reach 2600 rpm, allowing the unit to deliver high flow within its pressure envelope.
Installation is handled through a SAE-B two-hole flange with a 101.6 mm pilot diameter that centers the housing on the mounting pad. Twelve gear teeth inside the pump generate steady volumetric efficiency across the working range. The shaft is keyed with a 6.35 mm by 25.4 mm slot, providing positive drive engagement with the coupler. Pressure and suction ports employ SAE UN-2B BOSS O-ring threads, simplifying sealed line connections. Minimum operating speed is 500 rpm when system pressure is below 100 bar, increasing to 1000 rpm at 180 bar or higher to preserve lubrication films. A 42 × 26 × 7 mm NBR shaft seal contains the fluid and shields the bearing area from contamination.
Technical Specifications
Direction Of Rotation
Counterclockwise
Flange Pilot Diameter
101.6 mm
Flange Type
SAE-B, 2-Hole
Gear Teeth
12
Geometric Displacement
45 cm3/rev
Key Size
6.35 × Ø25.4
Line Connection
SAE Thread (UN-2B) BOSS O-Ring
Max Continuous Pressure
250 bar
Max Drive Torque (q Shaft)
180 Nm
Max Intermittent Pressure
250 bar
Max Pressure Peak
300 bar
Max Rotational Speed
2600 rpm
Min Speed (p<100 Bar, V=12 Mm2/s)
500 rpm
Min Speed (p=180 Bar..p2, V=12 Mm2/s)
1000 rpm
Shaft Seal
42×26×7 NBR
1620 Old Apex Road
Shipping & Payment Options
