Bosch Rexroth | FEE16C-2X100LK0B1M
FEE16C-2X/100LK0B1M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The FEE16C-2X/100LK0B1M throttle valve is produced by Bosch Rexroth and belongs to the FES Throttle Valves series. It modulates hydraulic flow in automated circuits where precise pressure control is required. A 0 to 10 V command value input sets the desired opening position without additional signal scaling. The integrated electronics return a 0 to −10 V actual value output so supervisory systems can verify the real spool position. All electronics are powered from a 24 VDC supply, and peak current consumption is 1.3 A, so power sources must be sized accordingly. Connection is through an 11-pin plug conforming to DIN 43651, which simplifies wiring during panel assembly. Hydraulic flow is designed to pass from port A to port B, ensuring unidirectional throttling. With a nominal flow of 100 L/min at a 10 bar differential and a minimum inlet pressure of 7 bar, the valve delivers stable regulation across mobile and industrial systems.
The unit tolerates operating pressures up to 315 bar, matching the maximum pilot pressure rating of 315 bar at port X, so the main and pilot stages share the same strength margin. Pilot control oil is limited to 2.5 L/min at port Y to prevent excessive load on auxiliary pumps. Only 0.9 cm³ of pilot oil is required for a full 0–100 % stroke, enabling rapid response with minimal fluid displacement. Mechanical fitment follows DIN ISO 7368-BA-06-2-A, allowing drop-in mounting inside standardized cavity blocks. An IP65 enclosure protects the electronics from dust ingress and low-pressure water jets encountered in plant wash-down zones. NBR sealing elements maintain compatibility with petroleum-based hydraulic fluids. The assembly weighs 2.9 kg, which eases manual installation without lifting aids.
Technical Specifications
Actual Value Output
0 to -10 V
Command Value Input
0 to 10 V
Current Consumption (imax)
1.3 A
Direction Of Flow
A to B
Electrical Connection
DIN 43651 11-pin
Installation Standard
DIN ISO 7368-BA-06-2-A
Ip Rating
IP65
Max Operating Pressure
315 bar
Max Pilot Oil Flow (port Y)
2.5 L/min
Max Pilot Pressure (port X)
315 bar
Min Inlet Pressure (a→b)
7 bar
Nominal Flow (Δp=10 Bar)
100 L/min
Pilot Oil Volume (0→100%)
0.9 cm3
Seal Material
NBR
Supply Voltage
24 VDC
Weight
2.9 kg
1620 Old Apex Road
Shipping & Payment Options
