ELM1-27W2-NSW-NN

The ELM1-27W2-NSW-NN power cable belongs to the ELM eLion Power Cables series manufactured by Bosch Rexroth for hydraulic automation where robust energy transfer between an inverter and a pump-drive motor is required. A conductor cross-section of 70 mm² allows the cable to carry the high currents drawn by large displacement hydraulic pumps without excessive voltage drop. The stranded copper conductor reduces skin effect at variable-frequency drive outputs and provides flexibility during routing. A single-core layout simplifies phase identification and minimizes inductive coupling to adjacent lines. Both cable contact lugs are sized for 70 mm² so the termination does not limit current capacity. The red ELS-CN5*W* phase code marks the conductor for correct phase assignment, and a 90° angular connector at the inverter end orients the lead to maintain tight bend radii inside control enclosures.

Radiation cross-linked copolymer insulation surrounds the conductor, yielding elevated thermal and chemical resistance for oil-rich hydraulic environments. An outer jacket of radiation cross-linked polyolefin protects against abrasion while retaining flexibility in cold ambient conditions. Leak-tightness certified to IP6K7 and IP6K9K prevents water or dust ingress during high-pressure washdowns common on mobile hydraulic machines. A factory-installed cable protection pipe shields the jacket from stone impact and mechanical fatigue along moving booms. At the motor side, an M25 gland with a ring cable lug secures the conductor to the eLion power distribution port and provides strain relief so vibration does not loosen the connection.