Bosch Rexroth | DREBE10Z-1X315XYMG24K31A1M
DREBE10Z-1X/315XYMG24K31A1M
Request a Quote
Call for Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DREBE10Z-1X/315XYMG24K31A1M is a proportional reducing valve in the DRE Proportional Reducing Valves series from Bosch Rexroth, intended to keep a controlled secondary pressure in hydraulic automation systems. It handles operating pressures up to 315 bar while occupying the NG10 nominal size, and it mounts on an ISO 5781-AG-06-2-A interface for direct replacement on standard subplates. A maximum flow rate of 120 l/min lets it serve medium-capacity circuits, and a pilot flow ceiling of 0.8 l/min supplies the control stage without excessive energy loss. The solenoid accepts a 24 V DC supply, and a coil input resistance of 100 kΩ restricts current to a precise range that matches the proportional electronics. Electrical demand stays within 40 VA at full stroke so power supplies can be sized accurately.
The valve is specified for a 100 % duty cycle, allowing uninterrupted modulation during continuous machine operation. An IP65 degree of protection shields internal parts from dust and low-pressure water jets, and NBR seals provide compatibility with common mineral oils. The electrical interface is a 6P+PE DIN 43563-AM6 connector, giving quick detachment during service while maintaining the protective earth. It tolerates vibration levels up to 25 g, ensuring stable performance on mobile or high-impact equipment. Maximum hysteresis is limited to 1 %, so commanded pressure changes are followed with minimal offset. The unit can be installed in any orientation, simplifying layout within confined manifolds, and it weighs 7.8 kg, which must be supported by the mounting hardware.
Technical Specifications
Degree Of Protection
IP65
Duty Cycle
100%
Electrical Connection
6P+PE DIN 43563-AM6
Hysteresis (max)
1%
Input Resistance
100 ka
Installation Position
Any
Max Flow
120 l/min
Max Operating Pressure
315 bar
Mounting Interface
ISO 5781-AG-06-2-A
Nominal Size
NG10
Pilot Flow (max)
0.8 l/min
Power Consumption (max)
40 VA
Seal Material
NBR
Supply Voltage
24 V DC
Vibration Resistance (max)
25 g
Weight
7.8 kg
1620 Old Apex Road
Shipping & Payment Options
