Bosch Rexroth | DBEE6-2X200G24K31A1M
DBEE6-2X/200G24K31A1M
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DBEE6-2X/200G24K31A1M pressure relief valve belongs to the DB Pressure Relief Valves series from Bosch Rexroth. It limits system pressure so actuators and piping stay within safe load ranges. The nominal setting is 200 bar, and the unit tolerates a maximum operating pressure of 350 bar to handle transient spikes. Flow capacity reaches 30 l/min, matching medium-size hydraulic circuits. It mounts on subplates that follow the ISO 4401-03-02-0-05 porting pattern for straightforward interchange with other CETOP 03 devices. Hysteresis stays below 3 % of the maximum setting, giving repeatable control during cyclic loads. A 100 % duty cycle permits continuous energization without thermal derating, while cleanliness class ISO 4406 (c) 20/18/15 defines the oil filtration level needed to prevent spool wear. The assembly weighs 2.5 kg, light enough for manifold installation by one technician.
The valve operates on a 24 V DC supply delivered through a seven-pole EN 175201-804 connector, ensuring standardized wiring. Solenoid coil resistance is 5.5 Ω at 20 °C, and maximum current draw is 1.5 A, so a 2 A time-lag fuse provides coordinated circuit protection. An IP65 enclosure shields internal parts from dust and low-pressure water jets during maintenance. NBR seals resist common hydraulic oils and retain fluid at compatible temperatures. Port T can tolerate back-pressures up to 50 bar, allowing remote reservoir placement without risking seal extrusion. Continuous operation at the stated electrical limits is possible because internal heating is controlled within the current rating. These characteristics support reliable pressure limitation in automated hydraulic power units used throughout manufacturing and mobile equipment.
Technical Specifications
Cleanliness Class
ISO 4406 (c) 20/18/15
Duty Cycle
100%
Electrical Connection
EN 175201-804 (7-pole)
Fuse Protection
2 A (time-lag)
Hysteresis
b13% (of max setting pressure)
Max Current Consumption
1.5 A
Max Flow
30 l/min
Max Operating Pressure
350 bar
Port T Max Pressure
50 bar
Porting Pattern
ISO 4401-03-02-0-05
Pressure Rating
200 bar
Protection Class
IP65
Seal Material
NBR
Solenoid Coil Resistance
5.5 2 (20C)
Supply Voltage
24 VDC
Weight
2.5 kg
1620 Old Apex Road
Shipping & Payment Options
