Bosch Rexroth | DAW10B2-5X200-10-6EG24N9K4
DAW10B2-5X/200-10-6EG24N9K4
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The DAW10B2-5X/200-10-6EG24N9K4 pressure cut-off valve is built by Bosch Rexroth and is part of the DA Pressure Cut-Off Valves series. It regulates hydraulic lines by disconnecting flow once the set pressure is reached and by re-engaging on demand. The valve is supplied in size 10 so it fits common NG10 subplates, and its subplate mounting pattern accelerates service changes in compact manifolds. A spindle with a protective cap lets maintenance staff adjust the cut-off point without exposing the mechanism to dirt. The directional spool section is driven by a high-power solenoid that accepts a 24 V DC supply, allowing direct control from standard machine controllers. Internal pilot oil return keeps external piping to a minimum and reduces leak points. The unit supports a maximum flow of 40 l/min, matching medium-capacity circuits in presses or test rigs. Overall mass is 5.3 kg, providing sufficient stability for vibration-prone installations.
System limits are defined by several pressure figures: the main body is rated for 200 bar continuous service, the P port may momentarily see up to 315 bar, and the T and Y ports must stay below 100 bar to avoid seal extrusion. A switching pressure differential of 10 % prevents chatter by ensuring the valve only resets after pressure has fallen a fixed amount. NBR seals are fitted to contain standard petroleum-based media, while compatibility is further supported by the specification for mineral oil grades HL and HLP as the hydraulic fluid. Cleanliness class ISO 4406 (c) 20/18/15 outlines the maximum particle load the valve can tolerate before wear increases. A mating connector is not included, so the installer must supply one that matches the solenoid’s electrical interface. Together these parameters clarify installation duties, set fluid conditions, and define how the valve behaves once threshold pressures are reached.
Technical Specifications
Adjustment Type
Spindle With Protective Cap
Cleanliness Class
ISO 4406 (c) 20/18/15
Directional Spool Valve
High-Power Solenoid
Hydraulic Fluid
Mineral Oil (HL, HLP)
Mating Connector
Not Included
Maximum Flow
40 l/min
Mounting Type
Subplate Mounting
Pilot Oil Return
Internal
Port P Pressure Limit
315 bar
Port T,y Pressure Limit
100 bar
Pressure Rating
200 bar
Seals
NBR
Size
10
Supply Voltage
24 V DC
Switching Pressure Differential
10%
Weight
5.3 kg
1620 Old Apex Road
Shipping & Payment Options
