Bosch Rexroth | 4WRVE16V120M-2XG24ETK0B5M
4WRVE16V120M-2X/G24ETK0/B5M
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRVE16V120M-2X/G24ETK0/B5M valve belongs to the 4WRVE Solenoid Directional Control Valves series manufactured by Bosch Rexroth and meters hydraulic flow proportionally in automated machinery. The subplate interface follows ISO 4401-07-07-0-05, enabling direct installation on standard CETOP 07 manifolds. A 24 V DC supply powers the integrated electronics, while a ±10 V setpoint input allows straightforward analog control. The 100 kΩ input impedance reduces loading on the motion controller that delivers this command. Wiring is completed through an 11P+PE connector specified by DIN 43563-AM6, which offers dedicated contacts for power and feedback signals. An IP65 housing guards the solenoids and electronics against dust and low-pressure water. Control oil is routed internally on both X and Y lines, so no external pilot piping is needed. The spool reaches its full stroke in 15 ms at 100 bar, supporting rapid position changes in closed-loop hydraulic axes.
The valve accommodates a maximum flow of 450 l/min for high-capacity cylinders, and it delivers a nominal flow of 120 l/min at a 10 bar differential for applications that need steadier metering. Ports A and B tolerate working pressures up to 250 bar, and the same 250 bar limit applies to the tank, X, and Y lines, simplifying overall pressure classification in the circuit. Stable pilot control is maintained because only 10 bar is required as the minimum control oil pressure. System fluid must meet ISO 4406 cleanliness class 18/16/13 to protect the precision spool and reduce wear. NBR seal material provides compatibility with standard mineral-based hydraulic oils across typical temperature ranges. The assembly weighs 10.4 kg, making it manageable for direct manifold mounting while remaining sturdy enough for heavy industrial and mobile equipment.
Technical Specifications
Control Oil Supply
X internal, Y internal
Degree Of Protection
IP65
Electrical Connector
11P+PE (DIN 43563-AM6)
Fluid Cleanliness Class
ISO 4406 18/16/13
Input Impedance
100 kOhm
Max Flow (qmax)
450 l/min
Max Pressure (t, X, Y)
250 bar
Max Working Pressure (p, A, B)
250 bar
Min Control Oil Pressure
10 bar
Mounting Interface
ISO 4401-07-07-0-05
Nominal Flow (10 Bar Dp)
120 l/min
Response Time 0-100% (x=100 Bar)
15 ms
Seal Material
NBR
Setpoint Input
+/- 10 V
Supply Voltage
24 V DC
Weight
10.4 kg
1620 Old Apex Road
Shipping & Payment Options
