Bosch Rexroth | 4WRVE16V1-200M-2XG24K0B5M
4WRVE16V1-200M-2X/G24K0/B5M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRVE16V1-200M-2X/G24K0/B5M valve from Bosch Rexroth belongs to the 4WRVE Solenoid Directional Control Valves series and is installed to meter flow and direct pressure in automated hydraulic circuits. It responds to a ±10 V command signal, allowing closed-loop controllers to position the spool proportionally. An input impedance of 100 kΩ minimizes loading on the source electronics, while a dedicated +24 V DC supply powers the on-board amplifier. Electrical demand is limited to 30 VA, so cabinet power allocation remains straightforward, and the coil supports a 100 % duty cycle for continuous energization. Flow characteristic M defines the slope of the flow-versus-signal curve, giving predictable actuation, and spool symbol V1 specifies the internal porting pattern selected for this variant. The valve mounts on a sub-plate that matches ISO 4401-07-07-0-05, enabling direct replacement in standardized manifolds without additional machining.
During operation the unit provides a nominal flow of 200 L/min at a 10 bar differential, supporting medium-size actuator groups, while a maximum flow capability of 450 L/min accommodates transient peaks. The pilot stage draws 24 L/min to shift the main spool, and at least 10 bar pilot pressure is required to ensure reliable movement. Working ports P, A, and B can be pressurized to 350 bar, whereas ports T, X, and Y are limited to 250 bar, defining circuit pressure selection. An IP65 degree of protection shields the enclosure against dust ingress and projected water, making it suitable for machine hall environments. Service weight is 10.4 kg, so mounting must account for this mass in manifold design. These hydraulic and mechanical ratings pair with the electrical data detailed earlier to deliver precise and continuous directional control in industrial automation systems.
Technical Specifications
Command Signal
±10 V
Degree Of Protection
IP65
Duty Cycle
100%
Flow Characteristic
M
Input Impedance
100 kΩ
Max Flow Qmax
450 L/min
Max Power Input
30 VA
Max Pressure (p,a,b)
350 bar
Max Pressure (t,x,y)
250 bar
Min Pilot Stage Pressure
10 bar
Mounting Interface
ISO 4401-07-07-0-05
Nominal Flow (Δp=10 Bar)
200 L/min
Pilot Flow Qn
24 L/min
Spool Symbol
V1
Supply Voltage
+24 V DC
Weight
10.4 kg
1620 Old Apex Road
Shipping & Payment Options
