Bosch Rexroth | 4WRVE10V55M-2XG24K0B5M
4WRVE10V55M-2X/G24K0/B5M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRVE10V55M-2X/G24K0/B5M valve is produced by Bosch Rexroth as part of the 4WRVE Solenoid Directional Control Valves series. It meters and switches hydraulic flow for automation tasks by shifting a spool in response to an electric reference. The NG10 valve size follows the ISO 4401-05-05-0-05 mounting pattern, allowing direct installation on standardized sub-plates. A progressive M flow characteristic combined with the V spool symbol provides gradual port opening for fine position control. At a 10 bar pressure drop the nominal flow reaches 55 l/min, supporting medium-capacity cylinders or motors. Pilot supply is taken from an external control oil inlet to maintain stable actuation forces. Electrical interfacing uses a 24 V DC supply through an 11P+PE connector, while the command signal of ±10 V is sensed through a 100 kΩ input impedance to match common servo controllers.
The enclosure achieves an IP65 degree of protection when the mating connector is secured, blocking dust and low-pressure water jets during field operation. NBR seals are fitted to handle standard hydraulic fluids and to limit internal leakage. System pressure may reach 350 bar on ports P, A, and B, whereas ports T, X, and Y are restricted to 250 bar to safeguard the return and pilot circuits. Coil consumption does not exceed 30 VA, reducing the load on the machine’s power supply and minimizing heat generation in the cabinet. With a mass of 8.0 kg the unit can be installed by one technician yet provides enough rigidity to resist vibration on mobile or stationary equipment. These limits allow the valve to regulate force and speed in presses, manipulators, and other automated hydraulic machinery without exceeding electrical or hydraulic tolerances.
Technical Specifications
Control Oil Inlet
External
Degree Of Protection
IP65
Electrical Connection
11P+PE
Flow Characteristic
M (Progressive)
Input Impedance
100 kΩ
Input Signal
±10 V
Max Power Input
30 VA
Max Pressure Ports P, A, B
350 bar
Max Pressure Ports T, X, Y
250 bar
Mounting Pattern
ISO 4401-05-05-0-05
Nominal Flow (Δp=10 Bar)
55 l/min
Seal Material
NBR
Spool Symbol
V
Supply Voltage
24 V DC
Valve Size
NG10
Weight
8.0 kg
1620 Old Apex Road
Shipping & Payment Options
