Bosch Rexroth | 4WRTE32V600P-4X6EG24K31A1M
4WRTE32V600P-4X/6EG24K31/A1M
Request a Quote
In-Stock, Ships 3-5 Days
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRTE32V600P-4X/6EG24K31/A1M valve is manufactured by Bosch Rexroth as part of the 4WRTE Directional Control Valves series and is used to direct hydraulic flow in automated machinery. It delivers a rated flow of 600 l/min at a 5 bar differential, supporting steady actuator speeds, while a 350 bar maximum pressure on ports P, A, and B lets it operate in high-pressure circuits. The mounting face follows the ISO 4401-10-09-0-05 porting pattern so it installs on standard subplates. Internal electronics run on a 24 VDC supply, and a ±10 V command input range enables proportional control from common motion controllers. Wiring is completed through a DIN EN 175201-804 (K31) plug, and current consumption is capped at 1.6 A to stay within typical power budgets. An IP65 protection class shields the enclosure from dust and water during plant operation.
A measuring output that also spans ±10 V provides position feedback for closed-loop regulation. The valve can accommodate short-term peaks up to a recommended 1600 l/min, allowing rapid cylinder or motor movements when needed. Electronic power draw reaches 72 VA, so cabinet cooling requirements remain limited, and residual ripple is held to 2.5 Vpp to preserve control accuracy. Port T withstands return pressures up to 250 bar, which suits circuits with elevated back-pressure. Pilot oil demands include a continuous 27 l/min flow and 17.7 cm³ volume for full-stroke control, figures used when sizing pilot lines. The complete assembly weighs 31.5 kg, making it manageable to lift into position during installation.
Technical Specifications
Command Input Range
±10 V
Electrical Connector
DIN EN 175201-804 (K31)
Max Current Consumption
1.6 A
Max Flow (recommended)
1600 l/min
Max Operating Pressure (p, A, B)
350 bar
Max Power Consumption
72 VA
Max Residual Ripple
2.5 Vpp
Max Return Pressure (port T, External)
250 bar
Measuring Output Range
±10 V
Pilot Oil Flow (x Or Y)
27 l/min
Pilot Oil Volume (0–100%)
17.7 cm³
Porting Pattern
ISO 4401-10-09-0-05
Protection Class
IP65
Rated Flow (Δp = 5 Bar)
600 l/min
Supply Voltage (nominal)
24 VDC
Weight
31.5 kg
1620 Old Apex Road
Shipping & Payment Options
