Bosch Rexroth | 4WRTE32E600P-4X6EG24K31A1M
4WRTE32E600P-4X/6EG24K31/A1M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRTE32E600P-4X/6EG24K31/A1M is a proportional directional control valve produced by Bosch Rexroth for the 4WRTE Directional Control Valves series. It meters hydraulic flow for automation circuits that need precise cylinder or motor positioning. Valve size 32 provides large flow paths suited to high-capacity manifolds. A rated flow of 600 l/min at a 5 bar control-edge pressure drop allows stable motion control in medium pressure systems, while a linear characteristic with fine control (P) enables predictable spool response to small command changes. Ports P, A, and B withstand operating pressures up to 350 bar so the unit can handle heavy-duty actuator loads. The porting pattern follows ISO 4401-10-09-0-05, permitting direct mounting on standard subplates. Spool position is commanded by an analog ±10 V interface A1, and the solenoid coil is powered from a nominal 24 V DC supply through a DIN EN 175201-804 connector.
Environmental and electrical limits are defined for reliable service. An IP65 protection class shields internal parts against dust and water jets during machine operation. The coil can reach 150 °C without losing insulation strength, and maximum current draw is limited to 1.6 A to stay within typical power supply ratings. Pilot oil is taken internally, but return oil is routed externally through port Y, keeping pilot flow independent of tank pressure. The pilot stage accepts supply pressures up to 315 bar, and the external return line must not exceed 250 bar at port T. For installations needing higher displacement capability, the manufacturer recommends limiting total flow through the main stage to 1600 l/min so the valve remains within dynamic performance limits.
Technical Specifications
Electrical Connector
DIN EN 175201-804
Flow Characteristic
Linear w/ Fine Control (P)
Input Signal
±10 V (Interface A1)
Max Coil Temperature
150 °C
Max Current Consumption
1.6 A
Max Operating Pressure
350 bar (Ports P, A, B)
Max Pilot Supply Pressure
315 bar
Max Return Pressure (port T, External)
250 bar
Pilot Oil Return
External (Port Y)
Pilot Oil Supply
Internal
Porting Pattern
ISO 4401-10-09-0-05
Protection Class
IP65
Rated Flow
600 l/min (Δp=5 bar/control edge)
Recommended Max Flow
1600 l/min
Supply Voltage (nominal)
24 V DC
Valve Size
32
1620 Old Apex Road
Shipping & Payment Options
