Bosch Rexroth | 4WRTE10W8-100L-4X6EG24ETK31A1M
4WRTE10W8-100L-4X/6EG24ETK31/A1M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRTE10W8-100L-4X/6EG24ETK31/A1M valve belongs to the 4WRTE Directional Control Valves series manufactured by Bosch Rexroth for hydraulic automation tasks. It is built to nominal size 10, so it integrates with medium-capacity manifolds, and the ISO 4401-05-05-0-05 porting pattern enables direct subplate mounting. A rated flow of 100 l/min at a 5 bar pressure drop per edge meters actuator speed precisely, while a ±10 % flow tolerance defines expected deviation; up to 170 l/min can be handled as the recommended maximum when faster motion is needed. The unit withstands operating pressures to 350 bar for high-pressure circuits. Fluid cleanliness must not exceed ISO 4406 18/16/13 to guard the spool and pilot stage from wear. An IP65 protection class seals the electrical enclosure against dust and water spray encountered in industrial environments.
The integrated electronics accept a ±10 V command and feedback signal, allowing direct connection to common motion controllers. They operate from a nominal 24 V DC supply, with an allowable range between 18 V DC and 35 V DC to accommodate supply variation. Maximum current consumption is 1.6 A, and total power draw does not exceed 72 VA; these values guide fuse sizing and power-supply selection. Control stability is maintained as long as residual ripple on the supply stays below 2.5 Vpp. The assembly weighs 8.7 kg, which must be considered when selecting mounting hardware and during service handling.
Technical Specifications
Cleanliness Class
ISO 4406 18/16/13
Command/actual Value Interface
±10 V (A1)
Max Current Consumption
1.6 A
Max Power Consumption
72 VA
Max Residual Ripple
2.5 Vpp
Maximum Flow (recommended)
170 l/min
Maximum Operating Pressure
350 bar
Maximum Supply Voltage
35 V DC
Minimum Supply Voltage
18 V DC
Nominal Size
10
Porting Pattern
ISO 4401-05-05-0-05
Protection Class
IP65
Rated Flow (Δp=5 Bar/edge)
100 l/min
Rated Flow Tolerance
±10%
Supply Voltage (nominal)
24 V DC
Weight
8.7 kg
1620 Old Apex Road
Shipping & Payment Options
