Bosch Rexroth | 4WRTE10Q2-100P-4X6EG24K31A1M
4WRTE10Q2-100P-4X/6EG24K31/A1M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRTE10Q2-100P-4X/6EG24K31/A1M valve is produced by Bosch Rexroth for the 4WRTE Directional Control Valves series and is intended to direct hydraulic flow in automated machinery. Its nominal size of NG10 fits standard manifold cavities, while the ISO 4401-05-05-0-05 porting pattern simplifies block mounting in modular systems. A linear flow characteristic with a fine control range lets the controller meter oil precisely, and a rated flow of 100 l/min at a 5 bar pressure drop per edge meets the needs of medium-capacity actuators. The unit withstands operating pressures up to 350 bar, so it can be used in high-pressure circuits. NBR sealing material is selected for compatibility with common hydraulic fluids, and an IP65 protection class guards the internal electronics from dust and low-pressure water jets. A total weight of 8.7 kg provides mechanical stability during continuous duty.
The integrated electronics run from a 24 V DC supply, with maximum power consumption of 72 VA and peak current draw of 1.6 A, enabling straightforward power-supply sizing. Command signals are accepted over a ±10 V input range, and the 100 kΩ input resistance minimizes load on upstream controllers. An actual value output of ±10 V returns spool position for closed-loop feedback. All power and signal lines terminate in a DIN EN 175201-804 (K31) connector to streamline installation. Continuous operation is supported by a 100 % relative duty cycle, eliminating the need for cooldown intervals and allowing the valve to maintain proportional control throughout extended production cycles.
Technical Specifications
Actual Value Output
±10 V
Electrical Connector
DIN EN 175201-804 (K31)
Flow Characteristic
Linear With Fine Control Range
Max Current Consumption
1.6 A
Max Operating Pressure
350 bar
Max Power Consumption
72 VA
Nominal Size
NG10
Porting Pattern
ISO 4401-05-05-0-05
Protection Class
IP65
Rated Flow (Δp 5 Bar/edge)
100 l/min
Relative Duty Cycle
100%
Seal Material
NBR
Supply Voltage
24 V DC
Voltage Input Range
±10 V
Voltage Input Resistance
100 kΩ
Weight
8.7 kg
1620 Old Apex Road
Shipping & Payment Options
