Bosch Rexroth | 4WRTE10E100P-4X6EG24ETK31A5M
4WRTE10E100P-4X/6EG24ETK31/A5M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRTE10E100P-4X/6EG24ETK31/A5M directional control valve belongs to the 4WRTE Directional Control Valves series and is manufactured by Bosch Rexroth for closed-loop hydraulic automation. It is powered from a 24 V DC supply and draws up to 1.6 A during steady operation, with a 2.7 A impulse on actuation to shift the spool rapidly. The electronics accept a ±10 V command value so a motion controller can set the desired spool position, and the integrated LVDT returns a ±10 V measuring output for feedback to the same controller. All conductors terminate on a DIN EN 175201-804 K31 connector, simplifying wiring in field installations. Peak electrical demand reaches 72 VA, yet the design supports a continuous 100 percent duty cycle without derating, allowing the valve to remain energized for indefinite periods.
Hydraulic capability starts with a rated flow of 100 L/min at a 5 bar pressure drop across the control edge, while applications that require higher throughput can operate up to the recommended 170 L/min. The unit withstands 350 bar on ports P, A, and B, supporting high-pressure circuits common in presses and test rigs. Internal pilot channels supply and return oil, moving 7 L/min when the control signal ranges from zero to full stroke and displacing 1.1 cm³ within the pilot volume. Coil winding temperature may reach 150 °C under continuous load, so the housing carries an IP65 rating to block dust and water jets during elevated thermal conditions.
Technical Specifications
Command Value Input
±10 V
Current Consumption (max)
1.6 A
Electrical Connection
DIN EN 175201-804 (K31)
Impulse Current
2.7 A
Maximum Coil Temperature
150 °C
Maximum Flow (recommended)
170 l/min
Maximum Operating Pressure (p,a,b)
350 bar
Measuring Output
±10 V
Pilot Oil Flow (0–100%, 315 Bar)
7 l/min
Pilot Oil Supply/return
Internal/Internal
Pilot Oil Volume (0–100%)
1.1 cm³
Power Consumption (max)
72 VA
Protection Class
IP65
Rated Flow (Δp 5 Bar/control Edge)
100 l/min
Relative Duty Cycle
100%
Supply Voltage
24 V DC
1620 Old Apex Road
Shipping & Payment Options
