Bosch Rexroth | 4WRTE10E1-100L-4X6EG24ETK31A1M
4WRTE10E1-100L-4X/6EG24ETK31/A1M
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4WRTE10E1-100L-4X/6EG24ETK31/A1M valve belongs to the 4WRTE Directional Control Valves series from Bosch Rexroth and directs hydraulic flow in automated machinery. The NG10 size offers standardized port spacing for mid-range manifolds, while a rated flow of 100 l/min at a 5-bar control edge supports cylinders that demand moderate speed. A linear flow characteristic converts spool stroke into predictable volume change and simplifies loop tuning. Operating pressure reaches 350 bar on ports P, A, and B, enabling use in high-pressure presses. Both pilot oil supply and pilot oil return are internal to reduce external plumbing, and the pilot stage accepts pressures up to 315 bar. NBR seals confine mineral oil and withstand common hydraulic additives.
Embedded electronics accept a 24 VDC supply, and a ±10 V command signal positions the spool for proportional control. The input circuit shows 100 kΩ resistance, keeping load on the control card low, and the board tolerates up to 35 VDC with a maximum draw of 1.6 A. Wiring is completed through a DIN EN 175201-804 K31 connector that fits standard harnesses. The enclosure carries an IP65 rating to block dust and low-pressure water jets, allowing installation close to process areas. Overall weight is 8.7 kg, so a single technician can fit the valve during routine maintenance.
Technical Specifications
Command Signal Input
±10 V
Current Consumption (max)
1.6 A
Electrical Connector
DIN EN 175201-804 (K31)
Flow Characteristic
Linear
Input Resistance
100 kΩ
Max Operating Pressure (p, A, B)
350 bar
Max Supply Voltage
35 VDC
Pilot Oil Return
Internal
Pilot Oil Supply
Internal
Pilot Supply Pressure (max)
315 bar
Protection Class
IP65
Rated Flow (5 Bar/control Edge)
100 l/min
Seal Material
NBR
Size
NG10
Supply Voltage (nominal)
24 VDC
Weight
8.7 kg
1620 Old Apex Road
Shipping & Payment Options
