Bosch Rexroth | AZ-P-F-12-014-RQR12MB-SO022
AZ-P-F-12-014-RQR12MB SO022
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The AZ-P-F-12-014-RQR12MB SO022 gear pump belongs to the AZPF External High Performance Gear Pumps series and is manufactured by Bosch Rexroth. It supplies pressurized fluid for hydraulic automation tasks such as actuator control and circuit charging. A geometric displacement of 14.0 cm³ per revolution sets the flow rate produced at each shaft turn. Clockwise rotation direction aligns the inlet and outlet with power units that turn in the same sense. The pump tolerates speeds up to 3000 rpm so it can be driven directly by standard electric motors. A continuous pressure limit of 210 bar supports steady-state operation in medium-duty systems, while threaded ports machined to the UNF-2B (SAE) pattern connect to common hose fittings for reliable sealing.
An SAE J744 82-2 two-bolt mounting flange lets installers fasten the unit to power-pack plates using a standardized hole pattern. The 82.55 mm flange pilot diameter centers the housing on the mating surface and keeps shaft loads low. Intermittent pressure capability rises to 230 bar for short duty boosts, and a 250 bar peak limit withstands brief pressure spikes. A shaft end diameter of 15.875 mm fits keyed drive hubs to transfer torque within the rated envelope. NBR seals resist mineral hydraulic oils and contain fluid across normal temperature swings. Total weight of 3.65 kg simplifies manual handling during assembly and reduces mass in mobile equipment.
Technical Specifications
Flange Pilot Diameter
82.55 mm
Geometric Displacement
14.0 cm³/rev
Line Port Standard
UNF-2B (SAE)
Max Continuous Pressure
210 bar
Max Intermittent Pressure
230 bar
Max Peak Pressure
250 bar
Max Speed
3000 rpm
Mounting Flange
SAE J744 82-2 (A) 2-Bolt
Rotation Direction
Clockwise
Seal Material
NBR
Shaft End Diameter
15.875 mm
Weight
3.65 kg
1620 Old Apex Road
Shipping & Payment Options
