45VQ60A 86C20

The 45VQ60A 86C20 belongs to the VQ Thru-Drive Vane Pumps series produced by Vickers for hydraulic automation where constant fluid delivery is required. A displacement of 193.4 cm³ per revolution defines the volume moved each shaft turn and lets system designers match pump speed to actuator demand. Its flow rate of 375.499 l/min supports circuits that need high oil throughput without cavitation. A maximum working pressure of 175 bar establishes the upper limit for safe operation in pressurized lines. Right-hand shaft rotation aligns the unit with power trains that turn clockwise when viewed from the drive end. Internal ring size 60 governs the vane cartridge geometry to maintain volumetric efficiency across the pressure range. A cast-iron body supplies rigidity and abrasion resistance for long service life under continuous industrial duty.

A 1 1/2 in diameter four-bolt flange on the inlet port allows direct attachment to common suction plumbing and minimizes restriction. The front outlet positioned inline with the inlet keeps pressure and return lines in a straight path, simplifying manifold layout. Buna-N sealing elements contain petroleum-based hydraulic fluids while tolerating typical shop temperatures. Overall length of 11.98 in provides a reference for mounting rails, and a width of 8.38 in defines the lateral clearance needed inside the power unit enclosure. The height stands at 6.94 in, indicating the vertical space the pump occupies beneath the motor bell housing. A weight of 75 lb informs lifting requirements and bracket selection during installation.