Vickers | 35VQ30A-1C20
35VQ30A 1C20
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 35VQ30A 1C20 vane pump is produced by Vickers as part of the VQ Thru-Drive Vane Pumps series and supplies hydraulic power for automated motion circuits. It displaces 97.7 cm³ per revolution (5.96 in³ per revolution) to establish a predictable flow rate for automated actuators. At its continuous rating, it supplies 30 US gallons per minute for steady industrial cycles. A right-hand clockwise rotation allows direct coupling to standard power-take-offs on mobile or stationary drives. The flange mount with a single shaft seal simplifies installation onto pump pads while keeping external leakage paths minimal. Its C outlet position, aligned with the inlet, streamlines manifold layouts, and both ports use SAE four-bolt flanges to support rigid piping. A shaft diameter of 31.75 mm (1.250 in) together with a 7.94 mm (0.312 in) key transfers torque without slippage under load.
The unit operates up to 210 bar (3000 psi) to serve high-pressure work circuits such as presses and injection systems. Suction limitation is set at 5 in Hg vacuum so cavitation is avoided when reservoirs are below the pump. It also tolerates inlet pressures to 1.4 bar (20 psi) for boosted supply lines found on flooded tank arrangements. When driven at the reference speed it produces a typical delivery of 211.5 l/min (55 US gpm) to meet peak actuator demand. That condition draws about 87.7 kW (117.5 hp) of input power, data useful for sizing electric motors or engine drives.
Technical Specifications
Displacement
97.7 cm3/rev (5.96 in3/rev)
Inlet Vacuum Limit
5 in Hg
Max Inlet Positive Pressure
1.4 bar (20 psi)
Maximum Pressure
210 bar (3000 psi)
Mounting
Flange Mount (Single Shaft Seal)
Outlet Position
C (In Line With Inlet)
Port Connections
SAE 4-Bolt Flange (inlet/outlet)
Rated Capacity
30 USgpm
Rotation
Right-Hand (Clockwise)
Shaft Diameter
31.75 mm (1.250 in)
Shaft Key Width
7.94 mm (0.312 in)
Typical Delivery
211.5 l/min (55 USgpm)
Typical Input Power
87.7 kW (117.5 hp)
1620 Old Apex Road
Shipping & Payment Options
