923259

The 923259 hydraulic accessory belongs to the Vickers Hydraulic Accessories series and is produced by Vickers for use in automated fluid power systems. It is supplied with one base that serves as the mounting platform and one body that forms the primary fluid passage housing. A single cartridge cover is included to close the cavity and maintain internal pressure integrity. Sealing is achieved with three O-rings made of synthetic rubber to prevent leakage along assembled joints, while one plastic gasket provides an additional flat seal between rigid faces. A sleeve bearing, furnished in a quantity of one, supports any rotating element that passes through the body and reduces friction during operation. The complete assembly weighs 13.7 lb, permitting manual handling during installation without lifting equipment.

The unit is rated for a flow capacity of 25 US gpm so it can manage moderate circuit volumes in mobile or industrial machinery. Its pressure limit is 100 psi (7 bar), matching low-pressure return or auxiliary lines that require controlled flow without high stress on components. The accessory is suited for pump or motor shafts turning at up to 1200 rpm, aligning its dynamic seals and bearing with common drive speeds. A packaging volume of 0.083 cu ft protects the parts in transit while minimizing storage space in service inventories. These performance and handling figures allow the 923259 accessory to integrate reliably into hydraulic automation layouts where predictable flow, modest pressure, and compact logistics are required.