02-102511

The 02-102511 hydraulic accessory is manufactured by Vickers within the Vickers Hydraulic Accessories series. It meters fluid for automated actuators in industrial hydraulic systems. The unit delivers a geometric displacement of 2.78 in³ per revolution, defining how much oil moves with each shaft rotation. At its standard operating point it provides a rated flow of 14 gpm, which is achieved when the inlet sees 100 psi and the shaft runs at the rated speed of 1200 rpm. A minimum speed of 600 rpm is required to maintain volumetric efficiency and prevent excessive internal leakage at low flow conditions. Compact construction measuring 3.23 in in length and 3.51 in in both height and width lets the component fit into crowded power packs, while a weight of 5.00 lb allows straightforward handling during installation.

For higher demand circuits the 02-102511 maintains continuous outlet pressure up to 2000 psi, giving designers headroom for clamps, presses, or other high-force loads. The suction port tolerates up to 1.4 bar, so feed pumps or elevated reservoirs can be used without overstressing the housing. When anti-wear oil is selected, the inlet may operate at –0.17 bar, allowing the pump to draw fluid from tanks positioned below the mounting plane. These pressure boundaries, combined with the specified speed limits, provide a clear operating window that helps match motor torque, hose rating, and overall system layout to the accessory’s capabilities.