Vickers | 45V60A-1C22R
45V60A 1C22R
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 45V60A 1C22R vane pump is produced by Vickers as part of the V Series Vane Pumps series for hydraulic automation circuits. Its geometric displacement is 193 cm³ per revolution, establishing the theoretical flow each time the shaft turns. At 1200 rpm and 100 psi the pump supplies 60 US gpm, while a minimum drive speed of 600 rpm is required to maintain lubrication and prevent cavitation. Shaft rotation is clockwise when viewed from the shaft end to match standard engine couplings. The discharge port sits inline with the inlet, enabling straight-through manifold layouts that reduce elbow losses. Because the design is a single-stage hydraulic vane pump, pressure pulsations stay low and system components see uniform flow.
Flange mounting secures the 45V60A 1C22R directly to a power unit, and the SAE four-bolt flanges on both ports accept inch-thread connectors for quick service. The drive shaft transmits torque through a 5/16-inch square key to prevent rotational slip under load. Suction limits extend from −0.17 bar to 1.4 bar so the inlet line avoids vapor formation or seal stress. The housing withstands a continuous working pressure of 172 bar with anti-wear oil, supporting systems that operate close to 2500 psi. Operating fluid may reach 99 °C without harming internal surfaces, and acoustic emission at 1800 rpm is 71 dB(A), aiding compliance with typical industrial noise targets.
Technical Specifications
Fluid Temperature Maximum
99 C
Geometric Displacement
193 cm3/rev (11.75 in3/rev)
Inlet Pressure Maximum
1.4 bar (20 psi)
Inlet Pressure Minimum
-0.17 bar (5 inHg)
Max Continuous Pressure (aw Oil)
172 bar (2500 psi)
Minimum Speed
600 rpm
Mounting Type
Flange Mount
Outlet Position
Inline With Inlet
Port Connection
SAE 4-Bolt Flange (Inlet/Outlet)
Port Thread Type
Inch
Pump Type
Vane Pump
Rated Capacity (1200 Rpm, 100 Psi)
60 US gpm
Rotation (shaft End)
Clockwise
Shaft Key Size
5/16 In Square
Sound Level At 1800 Rpm
71 dB(A)
1620 Old Apex Road
Shipping & Payment Options
