Vickers | 4535V60A35-1CC22L
4535V60A35 1CC22L
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4535V60A35 1CC22L is manufactured by Vickers within the V Series Vane Pumps series and supplies pressurized fluid for hydraulic automation where two independent flow paths are required. Its double configuration places one section on the shaft end and another on the cover end, so the unit delivers 60 GPM and 35 GPM at those respective locations. A displacement of 193 cm³ per revolution on the shaft end and 112 cm³ per revolution on the cover end generate those flows when the drive speed changes. Counterclockwise rotation from the shaft end matches common electric-motor direction and avoids crossover plumbing. The flange mount centers the housing firmly against a reservoir plate, limiting vibration under load and simplifying alignment of the drive coupling.
Continuous operating pressure is rated at 172 bar (2500 psi), giving designers a ceiling for hose, fitting, and relief-valve selection. The speed range spans from 600 rpm to 1800 rpm; the lower limit maintains inlet filling, while the upper limit protects vanes from excessive centrifugal force. A moment of inertia of 0.004554 N·m·s² (0.04031 lb·in·s²) keeps startup torque modest so soft-start drives can accelerate the assembly smoothly. Inline outlet orientation places both discharge ports in line with the common inlet, reducing elbow fittings and easing pipe routing. Each hydraulic connection uses a 4-bolt flange to retain gasket compression during pressure cycling and speed service work. A standard seal package employs commonly stocked elastomers for routine maintenance. Housing weight of 53.5 kg (118 lb) requires mechanical lifting aids but remains suitable for mounting on typical power-unit frames.
Technical Specifications
Capacity (cover End)
35 GPM
Capacity (shaft End)
60 GPM
Displacement (cover End)
112 cm³/rev
Displacement (shaft End)
193 cm³/rev
Max Continuous Pressure
172 bar (2500 psi)
Max Speed
1800 rpm
Min Speed
600 rpm
Moment Of Inertia
0.004554 N·m·s² (0.04031 lb·in·s²)
Mounting
Flange Mount
Outlets Orientation
Inline With Inlet
Port Connections
4-Bolt Flange (Inlet, Outlet 1, 2)
Pump Configuration
Double
Rotation (from Shaft End)
Counterclockwise
Seal Type
Standard
Weight
53.5 kg (118 lb)
1620 Old Apex Road
Shipping & Payment Options
