Vickers | 4535V42A38-1AA22R
4535V42A38 1AA22R
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4535V42A38 1AA22R pump is produced by Vickers within the V Series Vane Pumps series and is intended to supply steady flow to hydraulic actuators in automated machinery. It installs through a flange mount, which aligns the housing accurately to motor adapters and resists side loads from connected piping. The unit turns clockwise when viewed from the shaft end, so drive couplings must match this direction of rotation. At the cover end its displacement is 121 cm³ per revolution, delivering a nominal 38 gallons per minute to circuits that require medium volume flow. Continuous working pressure is limited to 172 bar, allowing the pump to operate in systems that use standard industrial hose ratings. Speed can be reduced to 600 rpm for low-noise operation or increased to 1800 rpm for peak production rates without exceeding design limits. The assembled pump weighs 53.5 kg, so lifting equipment should be arranged for safe installation.
This double pump supplies additional flow through the shaft end where displacement rises to 138 cm³ per revolution, providing a rated capacity of 42 gallons per minute for parallel hydraulic functions. Fluid enters through an FL1-32 inlet flange that uses a 0.625-11 UNC thread, ensuring positive sealing under suction conditions. Outlet lines are connected with SAE four-bolt flanges; the primary outlet employs an FL1-12 flange with 0.50-13 UNC bolts, while the secondary outlet uses an FL1-10 flange with 0.437-14 UNC hardware, permitting balanced mounting of dual return hoses. Both outlets are positioned opposite the inlet in the AA orientation, which simplifies manifold design by keeping pressure ports on the same side of the pump body. These porting features streamline plumbing and help reduce assembly time on automated hydraulic skids.
Technical Specifications
Displacement (cover End)
121 cm3/rev (7.4 in3/rev)
Displacement (shaft End)
138 cm3/rev (8.4 in3/rev)
Inlet Flange Kit
FL1-32 (.625-11 UNC)
Max Continuous Pressure
172 bar (2500 psi)
Max Speed
1800 rpm
Min Speed
600 rpm
Mounting
Flange Mount
Outlet 1 Flange Kit
FL1-12 (.50-13 UNC)
Outlet 2 Flange Kit
FL1-10 (.437-14 UNC)
Outlet Orientation
AA (Both Opposite Inlet)
Port Connection
SAE 4-Bolt Flanges
Rated Capacity (cover End)
38 GPM
Rated Capacity (shaft End)
42 GPM
Rotation
Clockwise (From Shaft End)
Weight
53.5 kg (118 lb)
1620 Old Apex Road
Shipping & Payment Options
