Vickers | 4520V42A8-1CC22R
4520V42A8 1CC22R
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 4520V42A8 1CC22R pump belongs to the V Series Vane Pumps from Vickers and supplies hydraulic power for automated machinery. Designed as a clockwise rotating unit, it works between 600 rpm and 1800 rpm to match variable drive speeds. The cover end section displaces 27 cm³ per revolution, producing 8 gpm at 1200 rpm, and tolerates continuous pressures up to 207 bar to support medium-pressure actuator loops. Fluid lines connect through SAE four-bolt flanges with inch threads, and port O1 is inline with the inlet while port O2 sits 45 degrees clockwise from it to simplify plumbing. A maximum inlet pressure of 1.4 bar maintains full vane chambers at higher speeds and prevents cavitation.
At the shaft end, the pump delivers 138 cm³ per revolution and supplies 42 gpm at 1200 rpm for high-flow legs of the same system. This end is rated for continuous pressures up to 172 bar, allowing different loads to be served without an additional pump. The rotating group carries a moment of inertia of 0.003186 N·m·s², limiting acceleration torque demands on the prime mover, and uses a 5/16-inch square shaft key for secure coupling. The unit weighs 43.0 kg (95 lb), so mounting hardware must support this mass in mobile or fixed installations. Together, these features make the 4520V42A8 1CC22R a dual-flow solution for hydraulic automation where separate pressure and volumetric requirements exist.
Technical Specifications
Approximate Weight
43.0 kg (95 lb)
Cover End Displacement
27 cm3/rev (1.67 in3/rev)
Cover End Rated Flow (1200 Rpm)
8 gpm
Max Continuous Pressure (cover End)
207 bar (3000 psi)
Max Continuous Pressure (shaft End)
172 bar (2500 psi)
Max Inlet Pressure
1.4 bar (20 psi)
Max Speed
1800 rpm
Min Speed
600 rpm
Moment Of Inertia
0.003186 N·m·s² (0.02820 lb·in·s²)
Port Connections
Inlet/O1/O2 SAE 4-bolt flanges
Port Orientation
O1 Inline; O2 45° CW From Inlet
Port Thread Type
Inch threads
Rotation
Clockwise
Shaft End Displacement
138 cm3/rev (8.41 in3/rev)
Shaft End Rated Flow (1200 Rpm)
42 gpm
Shaft Key Size
5/16 in square
1620 Old Apex Road
Shipping & Payment Options
