Vickers | 35V30A-11C22L
35V30A 11C22L
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 35V30A 11C22L pump belongs to the V Series Vane Pumps series and is manufactured by Vickers for use in hydraulic automation circuits. Its displacement of 97 cm³ per revolution (5.91 in³/rev) yields a rated flow of 30 US gpm at 1200 rpm, delivering steady volume to cylinders and motors. A maximum continuous pressure of 172 bar (2500 psi) allows the unit to maintain load without overstressing internal parts. The minimum operating speed of 600 rpm lets the pump work with slow-turning prime movers while avoiding flow pulse issues. Left-hand counterclockwise rotation aligns the shaft with drives that follow standard CCW layouts. Flange mounting provides rigid alignment on power units, and the SAE 4-bolt flange port connection secures high-pressure lines against leakage during cyclic operation.
The cast iron housing resists deformation and abrasion, supporting long service life in industrial environments where pressure cycling is frequent. An allowable inlet range up to 1.4 bar positive and down to –0.17 bar vacuum helps prevent cavitation when reservoir levels fluctuate. The low rotor moment of inertia of 0.001395 N·m·s² keeps startup torque demands moderate, thereby decreasing mechanical stress on drive couplings. An outlet that is inline with the inlet simplifies pipe routing and minimizes elbow losses in compact power packs. Buna-N sealing elements remain compatible with petroleum-based hydraulic oils and moderate temperature ranges, keeping maintenance intervals predictable.
Technical Specifications
Displacement
97 cm³/rev (5.91 in³/rev)
Material
Cast Iron
Max Continuous Pressure
172 bar (2500 psi)
Max Inlet Pressure
1.4 bar (20 psi)
Min Inlet Pressure
-0.17 bar (5 inHg)
Minimum Speed
600 rpm
Moment Of Inertia
0.001395 N·m·s²
Mounting
Flange
Outlet Position
Inline With Inlet (C)
Port Connection
SAE 4-Bolt Flange (A)
Rated Capacity At 1200 Rpm
30 US gpm
Rotation
Left (CCW)
Seal Material
Buna-N
1620 Old Apex Road
Shipping & Payment Options
