Vickers | 35V25A-1C22R
35V25A 1C22R
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 35V25A 1C22R is produced by Vickers within the V Series Vane Pumps series and serves as a source of controlled hydraulic flow for automated machinery. It displaces 81 cm³ per revolution (4.94 in³ per revolution), giving predictable volume with each shaft turn. At 1200 rpm and 100 psi it delivers a rated capacity of 25 gpm, which helps size downstream actuators and coolers. The model endures a continuous system pressure of 172 bar (2500 psi) so it fits medium-pressure circuits. Operating speed can reach 1800 rpm when high flow is needed, while a minimum of 600 rpm supports slower duty cycles without stalling. Viewed from the shaft end, rotation is clockwise, matching common right-hand prime movers used in industrial power units.
The inlet side tolerates up to 1.4 bar (20 psi) but can operate with suction down to −0.17 bar (5 inHg), allowing flexible reservoir placement above or below the pump centerline. Flange mounting secures the housing to standard engine or motor adapters without additional brackets. The outlet is inline with the inlet in the C orientation, simplifying rigid pipe runs. Pressure lines attach through an SAE 4-bolt flange, and all port threads follow inch standards to align with North American fittings. Connections are therefore fast to assemble and seal, while the specified arrangement maintains compact layouts inside hydraulic manifolds and mobile equipment frames.
Technical Specifications
Displacement
81 cm3/rev (4.94 in3/rev)
Max Continuous Pressure
172 bar (2500 psi)
Max Inlet Pressure
1.4 bar (20 psi)
Max Speed
1800 rpm
Min Inlet Pressure
-0.17 bar (5 inHg)
Min Speed
600 rpm
Mounting
Flange mounting
Outlet Position
Inline with inlet (C)
Port Connection
SAE 4-bolt flange
Port Thread Type
Inch
Rated Capacity (1200 Rpm, 100 Psi)
25 gpm
Rotation (from Shaft End)
Clockwise
1620 Old Apex Road
Shipping & Payment Options
