Vickers | 3520V35E5-86CB22R
3520V35E5 86CB22R
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 3520V35E5 86CB22R vane pump belongs to the V Series Vane Pumps from Vickers and supplies hydraulic power in automation circuits. The shaft end displacement is 112 cm³ per revolution, so each rotation moves a large volume of fluid for high-flow branches. At 1200 rpm the shaft end produces a rated flow of 35 gpm, delivering the main stream required by primary actuators. The cover end displacement is 18 cm³ per revolution, providing a secondary flow path for auxiliary functions in the same housing. With the pump turning at 1200 rpm, the cover end delivers 5 gpm so low-flow circuits can operate without a separate unit. Continuous operation is supported up to 1800 rpm, allowing designers to match motor speed to peak cycle demands, while a minimum speed of 600 rpm defines the lower limit for controlled low-output conditions. Rotation from the shaft end is clockwise, which suits standard right-hand drive motors, and a 5/16-inch shaft key secures the mechanical connection to prevent slippage.
The cover section can withstand continuous pressure up to 207 bar, letting it handle high duty cycles without premature wear, whereas the shaft section is rated for 172 bar to define the maximum working load of the main outlet. A 4-bolt flange is used on the inlet port to simplify alignment with rigid suction lines and prevent leakage, and Outlet 1 uses the same 4-bolt flange for straightforward manifold mounting. Outlet 1 is positioned inline with the inlet, making pipe runs shorter and reducing pressure drop. Outlet 2 employs a straight-thread connection, giving installers an option for hose fittings where space is limited, and this second outlet sits 45 degrees counterclockwise from the inlet to enable dual-circuit layouts without interference. All ports are supplied with inch threads so the pump mates directly with common North American hydraulic fittings.
Technical Specifications
Cover End Displacement
18 cm3/r
Cover End Rated Flow (1200 Rpm)
5 gpm
Inlet Port Type
4-Bolt Flange
Max Continuous Pressure (cover)
207 bar
Max Continuous Pressure (shaft)
172 bar
Max Speed
1800 rpm
Min Speed
600 rpm
Outlet 1 Port Type
4-Bolt Flange
Outlet 1 Position
Inline With Inlet
Outlet 2 Port Type
Straight Thread
Outlet 2 Position
45° CCW From Inlet
Port Thread Type
Inch
Rotation (from Shaft End)
Clockwise
Shaft End Displacement
112 cm3/r
Shaft End Rated Flow (1200 Rpm)
35 gpm
Shaft Key Size
5/16 in
1620 Old Apex Road
Shipping & Payment Options
