Vickers | 3520V35A5-1CC22R
3520V35A5 1CC22R
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The 3520V35A5 1CC22R pump belongs to the V Series Vane Pumps series manufactured by Vickers for hydraulic automation in power units and machine tools. It employs flange mounting so the housing can bolt directly to a motor face without additional brackets. Inlet and outlet ports use an SAE 4-bolt flange interface, and the threads are in inch sizes to match standard tubing. Port number one sits inline with the shaft while port number two is angled 45 degrees clockwise, making hose routing easier in confined panels. Viewed from the shaft end, rotation is clockwise, which dictates drive coupling orientation. Operating speed may be set between 600 and 1800 rpm to coincide with common electric motor ranges, and the rotating assembly exhibits a moment of inertia of 0.001629 N·m·s², allowing rapid acceleration and deceleration when cycle times are critical.
The pumping group uses a vane design that combines two displacements to supply separate circuits. The shaft end displacement measures 112 cm³ per revolution and produces 35 gpm at 1200 rpm for primary actuators, while the cover end provides 18 cm³ per revolution and yields 5 gpm at the same speed for auxiliary functions. Inlet pressure must not exceed 1.4 bar (20 psi), so reservoir pressurization is limited to avoid seal damage. The shaft end can deliver up to 172 bar (2500 psi), and the cover end can reach 207 bar (3000 psi), enabling different pressure zones within a single housing without additional pumps.
Technical Specifications
Cover End Displacement
18 cm3/r (1.1 in3/r)
Cover End Rated Flow (1200 Rpm)
5 gpm
Max Inlet Pressure
1.4 bar (20 psi)
Max Pressure Cover End
207 bar (3000 psi)
Max Pressure Shaft End
172 bar (2500 psi)
Max Speed
1800 rpm
Minimum Speed
600 rpm
Moment Of Inertia
0.001629 N·m·s²
Mounting
Flange Mount
Port Connection
SAE 4-Bolt Flange (Inlet, Outlets)
Port Orientation
No.1 Inline, No.2 45° CW
Port Thread Type
Inch
Pump Type
Vane Pump
Rotation From Shaft End
Clockwise
Shaft End Displacement
112 cm3/r (6.8 in3/r)
Shaft End Rated Flow (1200 Rpm)
35 gpm
1620 Old Apex Road
Shipping & Payment Options
