Vickers | V210-3-1B12-S214
V210 3 1B12 S214
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V210 3 1B12 S214 pump is produced by Vickers for hydraulic automation tasks within the Square Vane Pumps series. It displaces 0.58 in³ of fluid per revolution, enabling predictable volume with each shaft turn. A maximum operating pressure of 2000 psi allows the unit to sustain typical industrial load demands, while a top speed of 1800 rpm defines the upper limit for drive selection. Under moderate conditions of 1200 rpm and 100 psi the ring capacity is 3 GPM, giving a reference point for continuous flow. The shaft rotates right-hand, viewed clockwise from the shaft end, so the driving motor must match this direction. A 0.750 in shaft diameter supports standard couplings and prevents excessive deflection at the stated speed.
Flange mounting with threaded ports simplifies installation by letting the pump bolt directly to a manifold or motor face, and the 3.250 in pilot diameter centers the housing for accurate alignment. The inlet uses a 1 in NPT connection under code S214, while the pressure outlet is 3/4 in NPT with the same code, both relying on the NPT thread form for common pipe fittings. The outlet port sits 90° counter-clockwise from the inlet, which aids hose routing in compact power units. A 0.1875 in shaft key width transmits torque without slip, matching standard keyway components. The flange-mount version weighs 18 lb, a consideration for support brackets and lifting during maintenance.
Technical Specifications
Displacement
0.58 in³/rev
Inlet Port Size
1 in NPT (S214)
Max Operating Pressure
2000 psi
Max Speed
1800 rpm
Mounting Type
Flange Mounting Threaded Ports
Outlet Port Orientation
90° CCW From Inlet (Code B)
Pilot Diameter
3.250 in
Port Thread Type
NPT
Pressure Port Size
3/4 in NPT (S214)
Ring Capacity
3 GPM (1200 rpm, 100 psi)
Shaft Diameter
0.750 in
Shaft Key Width
0.1875 in
Shaft Rotation
Right-Hand (CW From Shaft End)
Weight (flange Mount)
18 lb
1620 Old Apex Road
Shipping & Payment Options
