Vickers | V2020-1F13S6S-1BB30
V2020 1F13S6S 1BB30
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V2020 1F13S6S 1BB30 pump belongs to the Square Vane Pumps series from Vickers and is intended to supply pressurized oil for hydraulic automation circuits. A 2-bolt flange on an SAE B pad mounts the unit directly to standard power take-off pads, shortening installation time. Clockwise rotation when viewed from the shaft end aligns with engines or electric motors that turn in the same direction. The cover end delivers 1.19 in³ of oil per revolution, establishing the smaller of the pump’s two displacements for reduced flow demands. Under baseline conditions of 1200 rpm and 100 psi, the cover end supplies 6 gpm, providing steady flow for auxiliary actuators. It tolerates up to 2500 psi so it can drive cylinders that need moderate working pressure. A top speed limit of 3000 rpm prevents excessive vane tip velocity and wear. The first outlet uses a 1.0625-12 UN-2B thread so it connects to SAE straight-thread adapters without leakage, and this port sits 90° counter-clockwise from the inlet to keep plumbing compact in right-hand manifolds.
The shaft end forms the higher capacity stage, allowing the pump to satisfy variable system demands. It displaces 2.59 in³ per revolution, which increases the flow rate whenever higher actuator speed is required. At 1200 rpm and 100 psi this stage supplies 13 gpm, letting the circuit fill larger volumes quickly. A continuous pressure rating of 2200 psi on the shaft end balances higher volume with reliable component life. Maximum speed on this side is limited to 2400 rpm to restrict heat generation in the larger vane set. The second outlet is tapped 1-1/16-12 straight thread so common O-ring boss fittings can be used, and it is also located 90° counter-clockwise from the inlet to mirror the first outlet for symmetrical hose routing. The overall weight of 35 lb permits one-person handling during maintenance while still providing the mass needed to damp vibration.
Technical Specifications
Cover-end Displacement
1.19 in3/rev
Cover-end Max Pressure
2500 psi
Cover-end Max Speed
3000 rpm
Cover-end Rated Flow
6 gpm @1200 rpm & 100 psi
Mounting
2-Bolt Flange (SAE B Pad)
No. 1 Outlet Port Thread
1.0625-12 UN-2B
No. 1 Outlet Position
90° CCW From Inlet
No. 2 Outlet Port Thread
1-1/16-12 Straight
No. 2 Outlet Position
90° CCW From Inlet
Rotation
Clockwise (Viewed From Shaft End)
Shaft-end Displacement
2.59 in3/rev
Shaft-end Max Pressure
2200 psi
Shaft-end Max Speed
2400 rpm
Shaft-end Rated Flow
13 gpm @1200 rpm & 100 psi
Weight
35 lb
1620 Old Apex Road
Shipping & Payment Options
