Vickers | V2010-6F13S2S-80CD12-092-LH
V2010 6F13S2S 80CD12 092 LH
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V2010 6F13S2S 80CD12 092 LH pump is part of the Square Vane Pumps series made by Vickers for hydraulic automation where compact size and dual outputs are needed. Its cover-end section displaces 6.6 cm³ per revolution, providing 2 US gpm for pilot functions or lubrication circuits. That section endures 172 bar operating pressure and can run at up to 3000 rpm, supporting fast cycling without cavitation. Fluid enters through a 1.50 in SAE four-bolt flange, while the suction side accepts inlet pressures to 0.7 bar and vacuums down to 5 inHg, so reservoir height can vary. Installation uses an SAE A two-bolt pad for straightforward interchangeability, and the shaft is configured for counterclockwise rotation to match left-hand drive requirements.
The shaft-end section outputs 42.5 cm³ per revolution and delivers 13 US gpm, supplying the main system flow alongside the smaller cover-end stream. It tolerates 152 bar continuous pressure and a top speed of 2400 rpm, maintaining efficiency under heavier load. Two pressure outlets simplify circuit separation; port 1 carries a 1-1/16-12 UN-2B thread and port 2 uses a 3/4-16 UNF-2B thread for flexible plumbing. Together with the defined inlet flange, these ports speed assembly and maintenance. The complete unit weighs 13.6 kg, allowing one person to install or remove it. The combination of small and large displacements in a single housing lets designers obtain both low and high flow rates from one prime mover, reducing component count in hydraulic power units.
Technical Specifications
Cover-end Displacement
6.6 cm3/rev (0.40 in3/rev)
Cover-end Max Pressure
172 bar (2500 psi)
Cover-end Max Speed
3000 rpm
Cover-end Rated Delivery
2 US gpm
Inlet Port Size
1.50 in SAE 4-Bolt Flange
Max Inlet Pressure
0.7 bar (10 psi)
Max Inlet Vacuum
5 inHg
Mounting Flange
SAE A 2-Bolt Pad
No. 1 Outlet Port Thread
1-1/16-12 UN-2B
No. 2 Outlet Port Thread
3/4-16 UNF-2B
Rotation
Counterclockwise (Left-Hand)
Shaft-end Displacement
42.5 cm3/rev (2.59 in3/rev)
Shaft-end Max Pressure
152 bar (2200 psi)
Shaft-end Max Speed
2400 rpm
Shaft-end Rated Delivery
13 US gpm
Weight
13.6 kg (30 lb)
1620 Old Apex Road
Shipping & Payment Options
