Vickers | V2010-1F9S5S-1AD12L-167
V2010 1F9S5S 1AD12L 167
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V2010 1F9S5S 1AD12L 167 pump belongs to the Square Vane Pumps series and is produced by Vickers for hydraulic automation where compact flow sharing is needed. It secures to a power source with a 2-bolt SAE B flange mounting type, and the inlet uses an SAE 4-bolt flange with a 1.50 in flange diameter so the suction line remains rigid under vacuum. Cover-end displacement is 16.4 cm³/r (1.00 in³/r), supplying precise metered flow for auxiliary circuits, while a cover-end rated capacity of 5 US gpm at 1200 rpm and 100 psi defines its baseline output. The cover-end outlet thread is .750-16 UNF-2B, giving compatibility with common hydraulic fittings. Counter-clockwise rotation viewed from the shaft end enables coupling to engines spinning in that direction, and a 0.1875 in shaft key width locks the drive element against torsional loads.
On the shaft end, displacement rises to 29.7 cm³/r (1.81 in³/r), letting the pump deliver greater volume from the same input speed. At 1200 rpm and 100 psi this side outputs 9 US gpm, matching medium-duty actuator flows, and its outlet carries a 1.0625-12 UN-2B thread for larger pressure lines. Both ends tolerate a maximum operating pressure of 172 bar (2500 psi), allowing the unit to work in high-pressure manifolds without derating. Safe prime-mover limits are set by maximum speeds of 3200 r/min for the cover end and 2800 r/min for the shaft end, guarding vane integrity during rapid cycles. A 0.875 in shaft major diameter provides the torsional strength required to transmit power at these pressure and speed ratings.
Technical Specifications
Cover-end Displacement
16.4 cm3/r (1.00 in3/r)
Cover-end Outlet Thread
.750-16 UNF-2B
Cover-end Rated Capacity
5 USgpm @ 1200 rpm (100 psi)
Inlet Port Connection
SAE 4-Bolt Flange
Inlet Port Flange Diameter
1.50 in
Max Operating Pressure (cover-end)
172 bar (2500 psi)
Max Operating Pressure (shaft-end)
172 bar (2500 psi)
Max Speed (cover-end)
3200 r/min
Max Speed (shaft-end)
2800 r/min
Mounting Type
2-Bolt SAE B Flange
Shaft Key Width
0.1875 in
Shaft Major Diameter
0.875 in
Shaft Rotation
CCW (Viewed From Shaft End)
Shaft-end Displacement
29.7 cm3/r (1.81 in3/r)
Shaft-end Outlet Thread
1.0625-12 UN-2B
Shaft-end Rated Capacity
9 USgpm @ 1200 rpm (100 psi)
1620 Old Apex Road
Shipping & Payment Options
