Vickers | V2010-1F9S2S-11CC12
V2010 1F9S2S 11CC12
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V2010 1F9S2S 11CC12 pump is manufactured by Vickers and belongs to the Square Vane Pumps series. It is intended for hydraulic automation where two flow rates are required, as it is built in a double configuration. The front section displaces 29.7 cm³ per revolution and yields 19.8 US gpm at 1200 rpm, whereas the rear section displaces 6.6 cm³ per revolution and produces 4.7 US gpm, so separate high- and low-volume circuits can be supplied from one shaft. Twelve vanes provide uniform chamber transitions to reduce pulsation and noise. Clockwise shaft rotation aligns with common power-take-off arrangements on mobile equipment. The pump attaches through a two-bolt SAE B flange that centers the pad and simplifies drivetrain alignment.
The housing is rated for continuous pressures up to 172 bar, allowing the unit to drive cylinders and motors without overstress. It tolerates input speeds to 2800 rpm, enabling direct coupling to compact diesel or electric prime movers. Porting is split between two outlets; the primary outlet uses a 1.0625-12 UN-2B thread and the secondary outlet uses a 0.750-16 UNF-2B thread, so standard SAE adapters can be fitted without special machining. Buna-N seals contain petroleum-based fluid and survive elevated operating temperatures and pressure cycles. Overall weight is 13.6 kg, which supports single-person installation while adding mass that dampens pulsation in stationary circuits.
Technical Specifications
Front Displacement
29.7 cm³/rev
Max Pressure
172 bar
Max Speed
2800 rpm
Mounting Type
2-Bolt Flange (SAE B Pad)
No. 1 Outlet Port Thread
1.0625-12 UN-2B
No. 2 Outlet Port Thread
0.750-16 UNF-2B
Pump Configuration
Double
Rated Flow (front @1200 Rpm)
19.8 US gpm
Rated Flow (rear @1200 Rpm)
4.7 US gpm
Rear Displacement
6.6 cm³/rev
Seal Material
Buna-N
Shaft Rotation
Right (CW)
Vane Count
12
Weight
13.6 kg
1620 Old Apex Road
Shipping & Payment Options
