Vickers | V2010-1F9S2S-11AA12L
V2010 1F9S2S 11AA12L
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V2010 1F9S2S 11AA12L belongs to the Square Vane Pumps series and is manufactured by Vickers for hydraulic automation systems that need two discrete flow sections in one unit. A 2-bolt SAE B flange mount secures the pump directly to standard prime movers, while a 4-bolt flange inlet maintains a rigid, high-pressure seal on the suction side. Internal passages place port #2 at 135° counter-clockwise from the inlet and port #1 directly opposite, which simplifies hose routing in compact power packs. Counter-clockwise rotation viewed from the shaft end aligns with common industrial motor direction, and a working limit of 172 bar (2500 psi) allows the housing to support medium-pressure circuits. The assembly weighs 13.6 kg (30 lb), light enough for one-person installation. Drive torque is carried by a 0.873-inch major diameter spline with 13 teeth, ensuring secure power transfer under continuous duty.
At the cover end, the pump displaces 6.6 cm³ per revolution (0.40 in³/rev) and delivers a rated flow of 2 US gpm; this section can operate at speeds up to 3000 rpm to supply small actuators quickly. The shaft end increases displacement to 29.7 cm³ per revolution (1.81 in³/rev) so it can provide 9 US gpm for larger loads, though its speed is limited to 2800 rpm to control bearing stress. A 0.750-16 UN-2B straight-thread outlet on the cover end matches standard SAE adapters for leak-free pressure lines, whereas the shaft end uses a 1.0625-12 UN-2B thread to accommodate the higher flow path. These outlet sizes, combined with the dual-section flow ratings, let designers drive multiple circuits from a single pump without adding extra motors or frames.
Technical Specifications
Cover-end Outlet Port
0.750-16 UN-2B
Cover-end Rated Flow
2 US gpm
Displacement (cover End)
6.6 cm³/rev (0.40 in³/rev)
Displacement (shaft End)
29.7 cm³/rev (1.81 in³/rev)
Inlet Port Type
4-Bolt Flange
Max Pressure
172 bar (2500 psi)
Max Speed (cover End)
3000 rpm
Max Speed (shaft End)
2800 rpm
Mounting Type
2-Bolt Flange (SAE B)
Port Orientation
#2 135° CCW from inlet; #1 opposite
Rotation (viewed From Shaft End)
CCW
Shaft Major Diameter
0.873 in
Shaft Spline Teeth
13
Shaft-end Outlet Port
1.0625-12 UN-2B
Shaft-end Rated Flow
9 US gpm
Weight
13.6 kg (30 lb)
1620 Old Apex Road
Shipping & Payment Options
