Vickers | V2010-1F8S2S-1AA12
V2010 1F8S2S 1AA12
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V2010 1F8S2S 1AA12 vane pump is produced by Vickers and belongs to the Square Vane Pumps series, serving as a dual-section source of hydraulic power for automated machinery. On the cover end, the pump delivers 6.6 cm³ per revolution so auxiliary circuits receive fine metering, withstands 172 bar to keep small actuators working without case damage, and turns safely to 3000 rpm so it can couple directly to high-speed drives. At 1200 rpm and 100 psi it supplies 2 US gpm, giving a steady pilot flow for directional valves. The inlet opening is 38.1 mm, which maintains adequate oil supply and limits cavitation at peak speed. Right-hand (clockwise) rotation aligns with common engine PTOs, while a two-bolt SAE B mounting flange simplifies attachment to standard housings. Total mass is 13.6 kg, light enough for manual handling yet heavy enough to reduce vibration.
The unit carries an integral flow-control with relief valve so downstream components see constant volume and are protected from overload without extra manifolds. A 1.0625-12 UN-2B threaded outlet routes oil from the larger stage, and a 0.750-16 UNF-2B outlet handles the secondary stream, allowing separate connections for different circuit demands. On the shaft end the displacement rises to 26.6 cm³ per revolution, supplying the main actuators with higher volume from the same housing, while retaining a 172 bar pressure ceiling to match the cover end. That section operates up to 2800 rpm to keep noise and heat within acceptable limits, and produces 8 US gpm at 1200 rpm and 100 psi so cylinders extend quickly before the built-in relief limits pressure spikes.
Technical Specifications
Cover-end Displacement
6.6 cm3/rev (0.40 in3/rev)
Cover-end Max Pressure
172 bar (2500 psi)
Cover-end Max Speed
3000 rpm
Cover-end Rated Flow (1200 Rpm, 100 Psi)
2 USgpm
Inlet Port Diameter
38.1 mm (1.50 in)
Integral Valve
Flow Control With Relief
Mounting Flange
2-Bolt SAE B
No. 1 Outlet Port Thread
1.0625-12 UN-2B
No. 2 Outlet Port Thread
0.750-16 UNF-2B
Rotation
Right-Hand (Clockwise)
Shaft-end Displacement
26.6 cm3/rev (1.62 in3/rev)
Shaft-end Max Pressure
172 bar (2500 psi)
Shaft-end Max Speed
2800 rpm
Shaft-end Rated Flow (1200 Rpm, 100 Psi)
8 USgpm
Weight
13.6 kg (30 lb)
1620 Old Apex Road
Shipping & Payment Options
