Vickers | V2010-1F7S1S-1AA12
V2010 1F7S1S 1AA12
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V2010 1F7S1S 1AA12 pump belongs to the Square Vane Pumps series from Vickers and supplies hydraulic fluid for automated motion control in two independent sections. It installs with a 2-bolt SAE B flange so it can bolt directly to common motor bell housings, and fluid enters through a SAE 4-bolt 1.50-inch inlet flange that supports high suction flow. Right-hand rotation matches clockwise prime movers found in most industrial skids. The cover end provides a displacement of 3.3 cm³ per revolution, delivering 1 US gpm at 1200 rpm and 100 psi for pilot or lube circuits. That end withstands continuous pressures up to 172 bar (2500 psi) and speeds to 3000 rpm, letting it share a drive with higher-demand elements without derating. Its outlet sits 135° counter-clockwise from the inlet so rigid tubing can be routed around neighboring components without sharp bends.
The shaft end handles the main flow with a displacement of 22.8 cm³ per revolution, producing 7 US gpm at the same 1200 rpm and 100 psi to feed cylinders or motors that need greater volume. It carries the identical 172 bar pressure ceiling and 3000 rpm speed limit, allowing both sections to run from a single prime mover under uniform load conditions. A primary outlet tapped 1.0625-12 UN-2B (SAE 12) accepts large-bore pressure hoses, while a secondary 0.750-16 UNF-2B thread provides an extra return or gauge port without adapters. This pairing of two outlet sizes simplifies plumbing in manifolds and reduces potential leak points. By combining matched pressure capability with different displacement values, the pump can service separate hydraulic circuits simultaneously and reduce component count in automated machinery.
Technical Specifications
Cover-end Displacement
3.3 cm³/rev
Cover-end Max Pressure
172 bar (2500 psi)
Cover-end Max Speed
3000 rpm
Cover-end Outlet Position
135° CCW From Inlet
Cover-end Rated Flow (@1200 Rpm, 100 Psi)
1 USgpm
Inlet Port
SAE 4-Bolt Flange (1.50 in)
Mounting
2-Bolt Flange (SAE B)
No.1 Outlet Port Thread
1.0625-12 UN-2B (SAE 12)
No.2 Outlet Port Thread
0.750-16 UNF-2B
Rotation
Right-Hand
Shaft-end Displacement
22.8 cm³/rev
Shaft-end Max Pressure
172 bar (2500 psi)
Shaft-end Max Speed
3000 rpm
Shaft-end Rated Flow (@1200 Rpm, 100 Psi)
7 USgpm
1620 Old Apex Road
Shipping & Payment Options
