Vickers | V20-1S13S-1C11
V20 1S13S 1C11
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The V20 1S13S 1C11 vane pump is manufactured by Vickers within the Square Vane Pumps series and is intended to provide steady hydraulic flow for automated equipment. Its displacement of 42.5 cm³ per revolution establishes the basic volume moved each shaft cycle, while a rated delivery of 13 US gpm at 1200 rpm and 100 psi supports medium-duty actuators. The unit sustains operation up to 152 bar, enabling circuits that need moderate working pressure, and it can turn at speeds as high as 2400 rpm to vary output with the prime mover. Clockwise rotation when viewed from the shaft end aligns with common power-train layouts, and the inlet tolerates up to 0.7 bar positive pressure so a flooded suction line can be used without overloading internal seals.
A sealed bearing carries the rotor and shields the lubricant from contamination, and a single-lip shaft seal restricts oil escape along the drive shaft. Installation is simplified by an SAE A two-bolt flange, allowing direct mounting on standard pump pads. The suction port uses a 1.625-12 UN-2B thread, and the discharge port is cut to 1.062-12 UN-2B, creating straightforward connections with straight-thread adapters. Because the outlet sits in line with the inlet, hose routing remains compact in tight power-unit enclosures. The inlet can accommodate vacuum levels down to 5 in Hg, permitting reservoir placements below the pump centerline without risking cavitation.
Technical Specifications
Bearing Type
Sealed Bearing
Displacement
42.5 cm3/rev (2.59 in3/rev)
Inlet Port Thread
1.625-12 UN-2B
Max Inlet Positive Pressure
0.7 bar (10 psi)
Max Inlet Vacuum
5 in Hg
Max Operating Pressure
152 bar (2200 psi)
Max Speed
2400 rpm
Mounting Type
2-Bolt Flange (SAE A)
Outlet Port Orientation
In Line With Inlet Port
Outlet Port Thread
1.062-12 UN-2B
Rated Delivery
13 US gpm (1200 rpm, 100 psi)
Rotation
CW (Viewed From Shaft End)
Shaft Seal Type
Single Lip
1620 Old Apex Road
Shipping & Payment Options
