V10 1P7P 1B20L

The V10 1P7P 1B20L vane pump belongs to the Square Vane Pumps series from Vickers and supplies constant flow for hydraulic automation circuits. With a displacement of 22.8 cm³ per revolution, the unit moves a fixed volume of oil each shaft turn to establish predictable actuator speed. Rated delivery reaches 7 US gpm when the shaft runs at 1200 rpm under 100 psi, so designers can size reservoirs and return lines accurately. Maximum working pressure of 138 bar defines the upper limit for system load without overstressing internal components. Counter-clockwise rotation aligns the shaft direction with left-hand drive arrangements common on industrial power packs. A two-bolt flange mounts the housing rigidly to a motor face, while the cast-iron body resists mechanical shock and maintains dimensional stability during high-pressure duty.

The hydraulic interface is handled by a 1 in NPT inlet that accepts standard pipe fittings for straightforward suction line routing. Discharge is oriented 90° counter-clockwise from the inlet, simplifying manifold layouts where right-angle hose runs are preferred. A Buna-N shaft seal confines fluid within the case and tolerates common petroleum-based oils encountered in factory equipment. Overall length of 6.75 in, width of 5.12 in, and height of 4.35 in allow the pump to fit compact motor brackets without exceeding enclosure clearances. The assembly weighs 15 lb, enabling single-person handling during installation or service. These dimensional and sealing characteristics work together to streamline mounting, plumbing, and maintenance tasks in automated hydraulic machines.