TSV10 06A20

The TSV10 06A20 vane pump is manufactured by Vickers as part of the Square Vane Pumps series and supplies pressurized fluid in hydraulic automation circuits. The pump displacement of 19.5 cm³ per revolution sets the volume transferred each shaft rotation, giving predictable flow scaling with speed. A maximum operating pressure of 152 bar enables the unit to support medium-pressure actuators without fatigue. When driven at 1200 rpm under 100 psi, it provides a rated flow of 6 US gpm, matching steady actuator or pilot circuit demands. Port position A places the pressure outlet opposite the inlet, simplifying hose routing where rear access is limited.

During high-demand cycles the pump can run up to 3000 r/min, so system designers can raise throughput by increasing drive speed. At that maximum speed and pressure, the shaft requires 18.3 kW, meaning the prime mover must supply a continuous 24.5 horsepower. An inlet vacuum limit of 5 in Hg guards against cavitation when the reservoir is below the pump centerline. With the shaft at full speed it delivers 55.3 L/min, equal to 14.6 US gpm, supporting rapid cylinder extension or motor rotation in compact hydraulic packages.