Vickers | SV3-10-C-8H-115AP
SV3-10-C-8H-115AP
Request a Quote
Call For Quote
What Happens Next?
Email Confirmation
You will get an email confirming we have received your inquiry.
Dedicated Account Manager
A team member will review your request and be in touch concerning any questions or specifications.
Quote Delivered
You will receive a comprehensive quote tailored to your specific needs.
The SV3-10-C-8H-115AP solenoid valve belongs to the Solenoid Valves series and is manufactured by Vickers for hydraulic automation tasks that require on-demand flow control. It is driven by a J Series coil, ensuring interchange with coils carrying the same designation. The coil is rated for 115 VAC and is internally rectified, which lets it connect to an AC source without external conversion components. Electrical entry is through a conduit connector termination, supplying a protected wiring interface. There is no manual override, so actuation occurs only when the coil is energized. The assembly tolerates pressures up to 210 bar (3000 psi), and it delivers a rated flow of 45 L/min (12 US gpm) to support medium-capacity actuators. Leakage is held below five drops per minute at the maximum pressure to reduce energy loss. Two ports complete the flow path, enabling basic open-or-shut service in a single hydraulic line.
The cartridge fits a C-10-2 cavity, which defines the bore geometry drilled in the manifold block. Its screw-in cartridge installation threads directly into that cavity and secures the valve in place without additional brackets. An aluminum housing contains the internal components while keeping overall mass low and providing resistance to common hydraulic fluids. Connection points are sized at 1/2 in SAE, aligning with standard hose and tube ends used in the same pressure class. The design tolerates fluid or ambient temperatures from −40 to 120 °C (−40 to 248 °F), covering both cold starts and high-load operation. Physical dimensions are 120.65 mm in height, 63.50 mm in length, and 50.80 mm in width, so the block must reserve sufficient space for installation and service access.
Technical Specifications
Cavity
C-10-2
Coil Series
J Series
Coil Termination
Conduit Connector
Coil Voltage
115 VAC (Internally Rectified)
Housing Material
Aluminum
Installation Type
Screw-In Cartridge
Leakage
<5 Drops/Min @ 210 bar
Number Of Valve Ports
2
Operating Temperature
-40 to 120 C (-40 to 248 F)
Override Type
None
Port Size
1/2 in (SAE)
Pressure Rating
210 bar (3000 psi)
Product Height
120.65 mm
Product Length
63.50 mm
Product Width
50.80 mm
Rated Flow
45 L/min (12 US gpm)
1620 Old Apex Road
Shipping & Payment Options
